 Timing problem (PLEASE HELP) |
 Sep 26, 2015 - 5:08 PM
|
 
|
|
Enthusiast Joined Jul 18, '15 From CA Currently Offline Reputation: 0 (0%)  |
So my friends recently helped replace the timing belt, oil seals, water pump on my 99 Celica GT with 5SFE motor.
We installed everything correctly including the timing. However we hand tightened the crank and brought it to a local shop to use their impact gun to shoot the bolt. As soon as they shot the bolt with the gun, the timing went off since they didnt lock the crank. So we took everything apart and redid the timing, but now the car won't start even when timing is set correctly. Since the 5sfe is non interference motor, I shouldn't have a bent value but what could be the cause? |
 |
Replies
|
Oct 3, 2015 - 11:21 PM
|
|
 Enthusiast  Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
You don't have to go to a shop to hit the pully, if you can buy a chain wrench you will be able to tighten it enough buy hand with
a 1/2 inch breaker bar. Put a cloth around the pully( so the chain wont damage it) and give it a good tighten it will be good. Anyways like the op said just start from scratch I don't like air guns a whole lot. |
Posts in this topic
sdsendoh Timing problem (PLEASE HELP) Sep 26, 2015 - 5:08 PM
Bitter Probably lined up the timing wrong, it's super... Sep 27, 2015 - 12:06 AM Smaay yep redo the timing. or, check the crank position... Sep 27, 2015 - 1:23 AM sdsendoh the thing is, the first 2 times we set the timing,... Sep 28, 2015 - 12:04 AM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 2:50 PM |