WTB: Stock Exhaust Parts 94-95 7a-fe, Looking for front flex pipe, catalytic converter |
WTB: Stock Exhaust Parts 94-95 7a-fe, Looking for front flex pipe, catalytic converter |
Jan 5, 2016 - 1:58 PM |
|
Enthusiast Joined Mar 29, '11 From Bloomington, IN Currently Offline Reputation: 0 (0%) |
As the topic suggests, I'm looking to pick up some gently used stock exhaust components for my 95 ST. It's getting pretty noisy, but I don't know how much longer I'll keep it stock, so I'm just looking for some cheap replacement parts to hold the exhaust together for a year.
I'm looking specifically for the front flex pipe and cat, but I'll also be open to other components as well if you'd rather sell them as a set. I'm located in northern Indiana, but can pick up anywhere in Chicagoland, SW Michigan, central Indiana. I'll also consider paying for shipping. Thanks! Edit: It seems not all 6gc's have the same exhaust setup, so if possible I'm only looking for parts from 94 or 95 STs. This post has been edited by senick: Jan 6, 2016 - 2:56 PM |
Jan 7, 2016 - 3:58 PM |
|
Enthusiast Joined Jan 30, '14 From Cortland NY Currently Offline Reputation: 5 (100%) |
http://www.showmetheparts.com/apexhaust/
Look at this site, it just shows the down pipe design but basically the difference was OBD I to OBD II as far as the design change. the 94/95 models used a longer manifold with a cat I believe where as the 96-99 models used a shorter manifold no resonator or cat, just flow through. Short answer, if you switch between the OBD generations you have to switch manifold and downpipe. Hope this helps. -------------------- 1997 ST:Limitedly Green
This car is not about racing... This car is not about power or performance... It's purely about being cool. |
Lo-Fi Version | Time is now: January 15th, 2025 - 7:51 PM |