 GT4 wheel offset??, what is the correct offset for wheels |
 Jan 26, 2016 - 6:18 PM
|
 
|
 Enthusiast  Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%)  |
I am on the hunt for wheels, but I am having a hard time source the offset to clear the gt4 calipers. would anyone know what the best offset to clear the calipers is?
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
 |
Replies
|
Jan 27, 2016 - 1:42 AM
|
|
 Enthusiast Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) |
In most cases ET35 is your best bet.
The standard wheels had an offset of ET45 but the wheels were obviously designed for the car.....they have really thin spokes which clear the front callipers.........., aftermarket wheels with an offset of ET45 will not clear the front callipers. I have tried many wheels and even an offset of ET35 is very close to the calliper in some designs. -------------------- |
Posts in this topic
4-eyed-freek GT4 wheel offset?? Jan 26, 2016 - 6:18 PM
BonzaiCelica You have to find a wheel design with a flat spoke ... Jan 27, 2016 - 12:32 AM 4-eyed-freek http://www.rimsdealer.com/wheels-rims/17x8...e%252... Jan 27, 2016 - 8:18 AM jesse09 I used to run a set of Katana wheels for a couple ... Jan 27, 2016 - 9:52 AM BonzaiCelica Dang they be heavy! Jan 27, 2016 - 12:30 PM
HectortheRican QUOTE (BonzaiCelica @ Jan 27, 2016 - 10... Jan 27, 2016 - 9:20 PM Tigawoods those are the wheels you are getting?
The casting ... Jan 28, 2016 - 8:55 AM 4-eyed-freek I held back after taking some heat on here. I pull... Jan 28, 2016 - 9:04 AM Tigawoods Nahh. I dont think you were getting heat. I think ... Jan 28, 2016 - 9:19 AM 4-eyed-freek I was cheap and went OZ.... Jan 28, 2016 - 9:27 AM jesse09 QUOTE (4-eyed-freek @ Jan 28, 2016 ... Jan 28, 2016 - 9:32 AM Tigawoods Thats enough info to quell my curiosity for now. I... Jan 28, 2016 - 10:41 AM 4-eyed-freek QUOTE (Tigawoods @ Jan 28, 2016 - 10... Jan 28, 2016 - 11:23 AM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 11:51 AM |