 GT4 wheel offset??, what is the correct offset for wheels |
 Jan 26, 2016 - 6:18 PM
|
 
|
 Enthusiast  Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%)  |
I am on the hunt for wheels, but I am having a hard time source the offset to clear the gt4 calipers. would anyone know what the best offset to clear the calipers is?
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
 |
Replies
|
Jan 27, 2016 - 9:52 AM
|
|
|
Enthusiast Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) |
I used to run a set of Katana wheels for a couple of years. They're cheap wheels but I never had any trouble with them.
However I ditched them cause I felt my car deserved a little better quality, and I'd say your GT-4 definitely does. They do look nice but i'd try to resist the temptation |
Posts in this topic
4-eyed-freek GT4 wheel offset?? Jan 26, 2016 - 6:18 PM
BonzaiCelica You have to find a wheel design with a flat spoke ... Jan 27, 2016 - 12:32 AM Nial In most cases ET35 is your best bet.
The standar... Jan 27, 2016 - 1:42 AM 4-eyed-freek http://www.rimsdealer.com/wheels-rims/17x8...e%252... Jan 27, 2016 - 8:18 AM BonzaiCelica Dang they be heavy! Jan 27, 2016 - 12:30 PM
HectortheRican QUOTE (BonzaiCelica @ Jan 27, 2016 - 10... Jan 27, 2016 - 9:20 PM Tigawoods those are the wheels you are getting?
The casting ... Jan 28, 2016 - 8:55 AM 4-eyed-freek I held back after taking some heat on here. I pull... Jan 28, 2016 - 9:04 AM Tigawoods Nahh. I dont think you were getting heat. I think ... Jan 28, 2016 - 9:19 AM 4-eyed-freek I was cheap and went OZ.... Jan 28, 2016 - 9:27 AM jesse09 QUOTE (4-eyed-freek @ Jan 28, 2016 ... Jan 28, 2016 - 9:32 AM Tigawoods Thats enough info to quell my curiosity for now. I... Jan 28, 2016 - 10:41 AM 4-eyed-freek QUOTE (Tigawoods @ Jan 28, 2016 - 10... Jan 28, 2016 - 11:23 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 8:00 AM |