Swapping in a 4th 3sgte soon, Need advice on what's needed to be done before dropping in |
Swapping in a 4th 3sgte soon, Need advice on what's needed to be done before dropping in |
Jan 29, 2016 - 3:48 PM |
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
I'm planning on swapping in a 4th gen 3sgte and want to know what's recommended to be swapped or replaced or repaired while the engine is still out? Is the waterpump interchangeable with the 5sfe? Should I replace the oil pump seal and pulley seal? I know they're a common leak on a 5sfe. Here's the list I've made talking to a friend of mine with a st184 4th gen swap.
Interchangeable with 2nd gen Front main seal #90311A0005 Rear main seal #9008031073 Alternator belt #909160229377 Power steering #99363-70760-83 Cam seals #9031135040 Injector Seals – 2zzge - 9030107024 Timing Belt – 3rd gen - 13568-79105 Wire - Wiregap Clutch Kit – SouthBend Oil – 10w30 Spark Plug – NGK Iridium BKR7EIX -------------------- |
Jan 29, 2016 - 9:25 PM |
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
I cant be positive on the 4th gen but 3rd gen does not like iridium plugs. Just a thought maybe to look into
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Lo-Fi Version | Time is now: December 2nd, 2024 - 6:48 PM |