6G Celicas Forums

Welcome Guest ( Log In | Register )

> Swapping in a 4th 3sgte soon, Need advice on what's needed to be done before dropping in
post Jan 29, 2016 - 3:48 PM
+Quote Post
ILoveMySilly97



Enthusiast
*****
Joined Mar 8, '12
From Hanford/Fresno, Ca
Currently Offline

Reputation: 20 (100%)




I'm planning on swapping in a 4th gen 3sgte and want to know what's recommended to be swapped or replaced or repaired while the engine is still out? Is the waterpump interchangeable with the 5sfe? Should I replace the oil pump seal and pulley seal? I know they're a common leak on a 5sfe. Here's the list I've made talking to a friend of mine with a st184 4th gen swap.

Interchangeable with 2nd gen

Front main seal #90311A0005
Rear main seal #9008031073
Alternator belt #909160229377
Power steering #99363-70760-83
Cam seals #9031135040

Injector Seals – 2zzge - 9030107024

Timing Belt – 3rd gen - 13568-79105

Wire - Wiregap
Clutch Kit – SouthBend
Oil – 10w30
Spark Plug – NGK Iridium BKR7EIX


--------------------
 
Start new topic
Replies
post Feb 1, 2016 - 12:51 PM
+Quote Post
ILoveMySilly97



Enthusiast
*****
Joined Mar 8, '12
From Hanford/Fresno, Ca
Currently Offline

Reputation: 20 (100%)




I remembered reading somewhere that the 5s Water pump is bigger and better?

This post has been edited by ILoveMySilly97: Feb 1, 2016 - 12:52 PM


--------------------

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 6:43 PM