Swapping in a 4th 3sgte soon, Need advice on what's needed to be done before dropping in |
Swapping in a 4th 3sgte soon, Need advice on what's needed to be done before dropping in |
Jan 29, 2016 - 3:48 PM |
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
I'm planning on swapping in a 4th gen 3sgte and want to know what's recommended to be swapped or replaced or repaired while the engine is still out? Is the waterpump interchangeable with the 5sfe? Should I replace the oil pump seal and pulley seal? I know they're a common leak on a 5sfe. Here's the list I've made talking to a friend of mine with a st184 4th gen swap.
Interchangeable with 2nd gen Front main seal #90311A0005 Rear main seal #9008031073 Alternator belt #909160229377 Power steering #99363-70760-83 Cam seals #9031135040 Injector Seals – 2zzge - 9030107024 Timing Belt – 3rd gen - 13568-79105 Wire - Wiregap Clutch Kit – SouthBend Oil – 10w30 Spark Plug – NGK Iridium BKR7EIX -------------------- |
Feb 1, 2016 - 2:31 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
i remember reading that somewhere too, but it was never confirmed. since you are going to a 4th gen, that would rule out the 5S pump anyways.
just get the one i posted the link to. its the newer style with the metal vaines. i have that pump in my 3rd gen swap, my all-trac and another 3rd gen engine i just built -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Lo-Fi Version | Time is now: December 2nd, 2024 - 4:32 PM |