 1mzfe spark plug tube removal, v6 solara 1999 |
 Feb 10, 2016 - 9:45 PM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
How in hell do I remove the spark plug tubes on my 1mzfe motor. they don't have threads on top like the 5s. I have tried heating them up and pulling them up and out with vise grips but they wont budge. any help would be appreciated.
-------------------- |
 |
Replies
|
Feb 11, 2016 - 11:56 AM
|
|
|
Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
QUOTE (Bitter @ Feb 11, 2016 - 12:37 AM)  I think they're pressed into the head during assembly and are not to be removed, I don't think Toyota sells them apart from the head as I don't seem them on any parts diagrams. Hope you didn't screw them up so bad they won't seal anymore, looks like if you did then you just junked a head. They are just aluminum tubes cut to a specific size. If for some reason I did mess one up I'm sure I can get a tube and cut it to size. According to the assembly drawing I have. It says that you coat them with atf then press them in using a SST. -------------------- |
Posts in this topic
doory100 1mzfe spark plug tube removal Feb 10, 2016 - 9:45 PM
Smaay WOAH!!!! why the hell do you want ... Feb 10, 2016 - 9:47 PM
doory100 QUOTE (Smaay @ Feb 10, 2016 - 9:47 P... Feb 10, 2016 - 10:20 PM Bitter I think they're pressed into the head during a... Feb 10, 2016 - 11:37 PM doory100 I have a assembly drawing that shows them being in... Feb 11, 2016 - 6:11 AM Bitter I didn't see them on the Toyota parts diagram,... Feb 11, 2016 - 8:54 AM Smaay they dont protrude to the bottom surface, havent y... Feb 11, 2016 - 9:02 AM Smaay bottom of 1MZ head Feb 11, 2016 - 9:07 AM doory100 Calm down. I'm not sure how the machine proces... Feb 11, 2016 - 9:44 AM doory100 RE: 1mzfe spark plug tube removal Feb 11, 2016 - 4:48 PM Bitter Cool, learned something new. Feb 11, 2016 - 9:51 PM doory100 Well I have given up. No luck and I don't want... Feb 11, 2016 - 11:30 PM Bitter Use an inside pipe wrench to try to spin it after ... Feb 12, 2016 - 7:55 AM Smaay again i dont know why you want to pull these. wha... Feb 15, 2016 - 12:21 PM doory100 Like I said. I gave up. So I'm not removing th... Feb 16, 2016 - 11:50 AM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2025 - 8:47 AM |