6G Celicas Forums

Welcome Guest ( Log In | Register )

> pig rich, looking for ideas
post Feb 24, 2016 - 1:28 PM
+Quote Post
Facime

Enthusiast

Joined Jun 21, '11
From Oregon
Currently Offline

Reputation: 0 (0%)




So I just bought someone elses problems. Its a 95 GT with 183K on the clock. Previous owner had an issue with the car running poorly. Will start but barely run. He threw some parts at it, plugs, wires, complete dizzy with new cap/rotor, map sensor, TPS.

Once I got it I verified compression is good. mechanical timing is right. plugs were new but sooty black across the board. I pulled the ECU and the caps all look good inside.


So I'm leaning now towards massive overfueling. Besides the ECU is there any other way that injectors can stay open? some kind of short maybe (is there a resistor pack)

Any tips for testing fuel pressure at the rail? I'm leaning towards bad pressure regulator or plugged return line. Any other thoughts or ideas?


Thanks

 
Start new topic
Replies
post Feb 24, 2016 - 2:27 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Hane you checked the FPR?


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.

Posts in this topic
- Facime   pig rich, looking for ideas   Feb 24, 2016 - 1:28 PM
- - richee3   Hane you checked the FPR?   Feb 24, 2016 - 2:27 PM
- - Box   Coolant temp sensor, for the ECU, can also cause i...   Feb 24, 2016 - 3:31 PM
- - Smaay   also check the O2 sensors   Feb 24, 2016 - 5:19 PM
- - Facime   Thanks for the ideas but I managed to figure it ou...   Feb 24, 2016 - 6:59 PM
- - Box   Should've scrapped them and just welded in che...   Feb 25, 2016 - 12:50 AM
- - Facime   don't have welding capability at home and live...   Feb 25, 2016 - 1:48 AM


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 1st, 2024 - 2:16 PM