Mkernz22's Progress Thread V2, Starting over on a new slate Options

[mkernz22]

Sadly, the time has come and soon I'll be decommissioning my 1995 Celica GT. She's had rot that I wanted to fix, but I know it's going to be too much to handle.
Old thread here: http://www.6gc.net/forums/index.php?showtopic=75896

So I'll be starting on a new slate with a 1994 GT hatch. The car only has 127,000 miles on it and is in really good condition.
There are some flaws such as the rear struts being blown, the high beam being cracked, the radiator pretty much on it's way out, the cracked intake hose, small ding in the drivers side fender, and the door cloth insert piece falling off....
But it's not like those aren't easy things to fix.

Starting off, this car is not intended to be a project car. I made that mistake with my 95 and I hate having a project / dd. It gets annoying.
Most of the things I intend to do will be done this coming spring, but some of the other minor things will still be in the works.


So to start off with what will happen.

Obviously swapping over the JDM tail lights. That's just a given. Sex appeal = +150%
Putting my winter tires on until the spring comes.
Swapping out the cracked high beam, cracked intake hose, and swapping over the radiator.
Pulling out that little dent.
Swap out the muffler for one that I've had in my shed.
KYB struts all around and lowered on I think sportline springs? I forget the brand.

Here comes the fun stuff
Poly bushings all around as well as the suspension bits and under body being undercoated.
Putting in all new hard brake and fuel lines because I already have them, so why not? (at some point)
SSIII lip kit will be painted and installed, except for the fronts until I get a post face bumper. The little black euro splitters should look fine in the meantime.

And I'm sick of typing so here are some pictures.
















This post has been edited by mkernz22: May 27, 2015 - 7:29 AM

[mkernz22]

Wow yeah, haven't touched this thread in a while.

Some things to come for the spring:
Get my SSIII covers cleaned and installed. Will most likely have to get a fabric paint for the rears since the tops have bad sun fade.
Replacing more suspension parts that I neglected to do in the first place such as new top hats and spring insulators.
Need to get new rear calipers, mainly the brackets, but you can't find just the brackets so I'll just get a fully loaded setup.
BRAND NEW rear adjustable control arms...or if I can find really good condition used ones on the low low cause I don't want to pay out the a$$ from the dealer (~$270/pair shipped to my door)

Also having my summer tires rebalanced with stick on weights so I can wrap the faces in a similar color silver. Tried to match it as best as I could.

Other than all that, I installed a bazooka subwoofer behind the rear seats. Small and compact so I can take it out when I need the space.
The gen2 3s hasn't seen any love since the alltrac has been taking up all the space in the garage. Looking to piece it together a little more over the summer. Might have it together for the fall, but I'm not 100% planning on it.