6G Celicas Forums

Welcome Guest ( Log In | Register )

> 94 celica ST idle flucation, cant get the idle to be steady.
post May 17, 2016 - 11:35 AM
+Quote Post
rapid36

Enthusiast
*
Joined Feb 5, '13
Currently Offline

Reputation: 0 (0%)




Hi everyone my 94 celica ST has a idle fluctuation when im in gear and have the fans on. when the fans go off i idle at about 1k. normal idle in park with no fans or accessories on is about 1.5k which I know is a issue, I replaced the fuel filter, spark plugs and spark plug wires, o2 sensor, throttle body and TPS from another celica but I dont think I aligned the TPS correctly? Do you think this may the cause? If so does anyone know how to properly re adjust the TPS sensor onto the throttle body?

https://youtu.be/mmk4e4pkoo8

Im also getting a code 25 which says "The air/fuel ratio feedback compensation vlave or additive control valve continues at the upper (lean) or lower (rich) limit for a certain period of time." And noticing this I had another set of fuel injectors that was off my old celica which ran just fine and put those on so I dont think its the injectors. Any help is appreciated.

This post has been edited by rapid36: May 17, 2016 - 11:43 AM
 
Start new topic
Replies
post Jun 12, 2016 - 1:39 PM
+Quote Post
VavAlephVav



Enthusiast
****
Joined Dec 3, '13
From Missourah
Currently Offline

Reputation: 0 (0%)




ah,
Sorry about that.
The 1.8L uses slightly different feeler gauges to do the same operation.

the BGBonline at Celcia Tech is here. This has all the factory service manual procedures you need.
http://bgbonline.celicatech.com/94_6gmanual/94_6gmanual.htm

the specific page this is under is called Adjustments.
http://bgbonline.celicatech.com/94_6gmanua...adjustments.pdf

It's basically the same procedure using a .016", .024", and .035" feeler gauge instead.

Enjoy!


--------------------
Bust a Deal; Face the Wheel.

Posts in this topic
- rapid36   94 celica ST idle flucation   May 17, 2016 - 11:35 AM
- - Box   Have you cleaned the idle air control valve?   May 17, 2016 - 12:50 PM
|- - rapid36   QUOTE (Box @ May 17, 2016 - 12:50 PM...   May 17, 2016 - 12:54 PM
- - Box   With the TPS you need to bridge TE1 and E1 before ...   May 17, 2016 - 1:19 PM
|- - rapid36   QUOTE (Box @ May 17, 2016 - 1:19 PM)...   May 18, 2016 - 11:54 AM
- - Box   I'd check around the intake manifold, throttle...   May 18, 2016 - 12:48 PM
|- - rapid36   QUOTE (Box @ May 18, 2016 - 1:48 PM)...   May 19, 2016 - 10:54 AM
- - Box   It won't run at its full potential with a vacu...   May 19, 2016 - 8:32 PM
|- - rapid36   QUOTE (Box @ May 19, 2016 - 8:32 PM)...   May 25, 2016 - 11:58 AM
- - Smaay   do not use RTV, get a replacement gasket and use p...   May 25, 2016 - 6:23 PM
|- - rapid36   QUOTE (Smaay @ May 25, 2016 - 7:23 P...   May 26, 2016 - 11:34 AM
- - Box   Yup, if you use silicone and ever have to take it ...   May 25, 2016 - 7:23 PM
- - rapid36   K new gaskets came in today and will be installing...   Jun 3, 2016 - 4:30 PM
- - rapid36   K added my new gasket, only did the throttle body ...   Jun 5, 2016 - 12:05 AM
- - VavAlephVav   Here's a thread for how 2 calibrate the TPS ...   Jun 6, 2016 - 5:47 PM
- - msk59   vavAlepVav. The OP has the ST engine and the tps c...   Jun 12, 2016 - 8:37 AM
- - VavAlephVav   ah, Sorry about that. The 1.8L uses slightly dif...   Jun 12, 2016 - 1:39 PM
- - Box   Meh, nevermind he already got to it.   Jun 12, 2016 - 1:50 PM
- - msk59   thanks I appreciate the prompt response.   Jun 12, 2016 - 3:05 PM
- - TRD4Life863203   I am having kind of a similar problem. I have a 95...   Jun 25, 2016 - 8:43 AM
- - VavAlephVav   I wonder if your problem may be in the ignition, m...   Sep 7, 2016 - 10:56 AM


Reply to this topicStart new topic
23 User(s) are reading this topic (23 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 15th, 2025 - 11:55 PM