6G Celicas Forums

Welcome Guest ( Log In | Register )

> Cross Compatibility of EGR Components?
post Jul 20, 2016 - 5:09 AM
+Quote Post
blickman

Enthusiast

Joined Feb 1, '14
From Phoenix
Currently Offline

Reputation: 0 (0%)




Have a 94 ST Manual Transmission. Rebuilt 7A-FE engine. CEL pn and throwing code 071. EGR valve doesn't hold vacuum when I apply vacuum to see if engine stalls.

Looks like I need to replace the EGR valve and possibly EGR modulator. I'm wondering if either of these are cross compatible with other models? For some reason both of these are very expensive for this engine and cheaper for other engines.

For example, I've only been able to find used EGR valves for the automatic transmission, not the manual transmission. If I could use the one for the automatic, I can save a bunch of dough. Are these interchangeable even though they have different part numbers?

Likewise for the modulator. I've found aftermarket ones on Ebay very cheap for the GT 5S-FE engine. The ones listed for the ST 7A-FE engine are much more expensive. Anyone know if there's any difference between these or if they're interchangeable?

Thanks for any guidance on this.
 
Start new topic
Replies
post Aug 10, 2016 - 2:54 PM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




Found it: http://www.ebay.com/itm/EGR-Valve-TOYOTA-L...1aI&vxp=mtr

Turns out it even has the part number RockAuto gives for a 7A-FE with the manual. Was fairly sure the one I had found was a Denso on clearance, but again that was over two years ago.

This post has been edited by Box: Aug 10, 2016 - 2:55 PM


--------------------
2001 Miata LS 5-speed

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 24th, 2024 - 8:26 AM