Factory 8" Speaker Options

[jlspec]

My 99 Celica Convertiable 8 inch speaker is blown. Does anyone know of a good 8" Mid bass driver that I can use. Current audio setup is just stock. Once I replace the 8 inch speaker I might as well change the rest. Anyone know the size of the stock front speakers?

[Syaoran]

Madisoundspeakerstore

parts-express

Dunno if this fits, but here's an example. Also check out the "speakers" section.

http://www.parts-express.com/pe/showdetl.c...number=292-2592

As a bit of extra knowledge: when looking at the specs, try to find something that has 4 ohms impedance and a Qts of about .707



Like these: http://www.parts-express.com/pe/showdetl.c...tnumber=290-356

=====

These are actually PERFECT speakers for what you need them: Qts of .70, 3.5mm xmax, 4ohm impedance... only issue might be the mounting depth but if you can make them fit they will definitely sound good.

http://www.parts-express.com/pe/showdetl.c...tnumber=290-310

This post has been edited by Syaoran: May 15, 2012 - 4:36 PM

[TerryE]

Madisoundspeakerstore parts-express Dunno if this fits, but here's an example. Also check out the "speakers" section. http://www.parts-express.com/pe/showdetl.c...number=292-2592 As a bit of extra knowledge: when looking at the specs, try to find something that has 4 ohms impedance and a Qts of about .707 Like these: http://www.parts-express.com/pe/showdetl.c...tnumber=290-356 ===== These are actually PERFECT speakers for what you need them: Qts of .70, 3.5mm xmax, 4ohm impedance... only issue might be the mounting depth but if you can make them fit they will definitely sound good. http://www.parts-express.com/pe/showdetl.c...tnumber=290-310

Thanks for the info, have the GW208-4's on order, I have been looking for a reasonably priced replacement since my OEM's foam dry rotted out.  - about five years ago, and I didn't want to have rebuild the audio system since it was great to begin with.

This post has been edited by TerryE: Aug 19, 2016 - 12:28 AM