 Axle bearing carier for a 1mzfe swap with a s54 |
 Sep 17, 2016 - 7:16 AM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
Need to know what axle bearing carrier I need to use. I tossed the auto one from my 1mzfe auto tranny by accident. My question is will the auto one work or do I need to modify the s54 hanger?
I am talking about the part that bolts to the 1mz motor where the passenger side axle half shaft sits. -------------------- |
 |
Replies
|
Sep 17, 2016 - 2:36 PM
|
|
|
Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
Yes I'm using the s54. So I need to fabricate the hanger from the 5sfe motor onto the 1mzfe. Any tips? Thanks again smaay
-------------------- |
Posts in this topic
doory100 Axle bearing carier for a 1mzfe swap with a s54 Sep 17, 2016 - 7:16 AM
Smaay if you are using the S54 you need to fabricate one... Sep 17, 2016 - 2:31 PM Smaay yeah I made my own, i cut a hole the size of the a... Sep 17, 2016 - 2:47 PM doory100 I'm just going to fabricate some kind of adapt... Sep 17, 2016 - 2:50 PM Smaay no i welded it to a plate that bolted to the block Sep 17, 2016 - 4:53 PM doory100 What lower rad hose did you use on your swap? Sep 30, 2016 - 6:46 PM
Smaay if you have a GT i made a hard pipe in an L shape ... Oct 2, 2016 - 9:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 8:16 AM |