 Axle bearing carier for a 1mzfe swap with a s54 |
 Sep 17, 2016 - 7:16 AM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
Need to know what axle bearing carrier I need to use. I tossed the auto one from my 1mzfe auto tranny by accident. My question is will the auto one work or do I need to modify the s54 hanger?
I am talking about the part that bolts to the 1mz motor where the passenger side axle half shaft sits. -------------------- |
 |
Replies
|
Sep 17, 2016 - 2:50 PM
|
|
|
Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
I'm just going to fabricate some kind of adapter at work so I can pull s54 hanger right onto the engine where are the original hanger was.
BTW how did you weld it onto the engine because it is Aluminum block and the hangar is made out of steel unless you use an aluminum one. This post has been edited by doory100: Sep 17, 2016 - 2:51 PM -------------------- |
Posts in this topic
doory100 Axle bearing carier for a 1mzfe swap with a s54 Sep 17, 2016 - 7:16 AM
Smaay if you are using the S54 you need to fabricate one... Sep 17, 2016 - 2:31 PM doory100 Yes I'm using the s54. So I need to fabricate ... Sep 17, 2016 - 2:36 PM Smaay yeah I made my own, i cut a hole the size of the a... Sep 17, 2016 - 2:47 PM Smaay no i welded it to a plate that bolted to the block Sep 17, 2016 - 4:53 PM doory100 What lower rad hose did you use on your swap? Sep 30, 2016 - 6:46 PM
Smaay if you have a GT i made a hard pipe in an L shape ... Oct 2, 2016 - 9:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 11:35 PM |