 jdm power folding mirror installation, for '95 usdm st hatchback |
 Sep 21, 2016 - 8:52 AM
|
 
|
 Enthusiast  Joined Jun 10, '09 From South Korea Currently Offline Reputation: 5 (100%)  |
i bought jdm folding mirrors from one of our members here, but can't figure out how to install them. i know there is sticky about this, but it's huge and messy. the jdm mirrors were taken from '94 st205 allegedly, and my celica is '95 usdm st. could someone help me with this issue? i just need a big picture about the whole installation procedure. i also have a jdm control switch as you can see in the pic. do i need a relay? if so what kind of relay?
This post has been edited by cellocinema: Sep 21, 2016 - 9:32 AM |
 |
Replies
|
Oct 17, 2016 - 1:27 PM
|
|
 Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
That diagram is for the 5th gen JDM mirrors.
Use this one. 
This post has been edited by azian_advanced: Oct 17, 2016 - 1:35 PM -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
|
Oct 17, 2016 - 7:31 PM
|
|
|
Enthusiast Joined Jun 10, '09 From South Korea Currently Offline Reputation: 5 (100%) |
many thanks! i found the comment below you mentioned on the sticky. were you referring to the 5th gen wiring diagram when you say 'this pic'? i'm a little confused because "this pic" was linked to the right one for 6gc.
"this pic has the polarity mixed up. notice the gray wire for the switch says ground, when it should be 12V power." i hope my relay was not shorted because of the polarity mix up. i'll try agin on this sunday. QUOTE (azian_advanced @ Oct 17, 2016 - 2:27 PM)  That diagram is for the 5th gen JDM mirrors.
Use this one. This post has been edited by cellocinema: Oct 17, 2016 - 7:42 PM |
Posts in this topic
cellocinema jdm power folding mirror installation Sep 21, 2016 - 8:52 AM
The_enD I have saved this a while back reading it in that ... Sep 21, 2016 - 10:48 AM The_enD You may also have to switch housings as that GT4 i... Sep 21, 2016 - 10:56 AM
cellocinema thanks for your info. yes i've read about ... Sep 21, 2016 - 8:18 PM cellocinema this is the pics of jdm control switch. there is n... Sep 22, 2016 - 12:59 AM The_enD I don't know what it really depends on when it... Sep 22, 2016 - 2:59 AM cellocinema thanks for your response. i still don't know i... Sep 22, 2016 - 5:56 AM The_enD Thank God mine came like this from the factory. Sep 22, 2016 - 6:36 AM cellocinema ok, i seem to know everything to install the jdm f... Sep 23, 2016 - 5:28 AM azian_advanced finding a used relay with pigtail harness would be... Sep 23, 2016 - 1:33 PM cellocinema yes i hope i can get a used one w/ pigtail but it... Sep 23, 2016 - 9:45 PM cellocinema i experimented wiring with a battery. mirror angle... Oct 16, 2016 - 10:51 AM cellocinema azian, you were wrong about this. the one i used b... Oct 23, 2016 - 10:12 AM azian_advanced i'm glad you got yours working.
just out of cu... Oct 23, 2016 - 11:33 AM cellocinema white
QUOTE (azian_advanced @ Oct 23, 2016... Oct 23, 2016 - 10:29 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 20th, 2025 - 2:52 AM |