Engine is done. Options

[anon1ski]

So I went to change my valve cover gasket and found my seals are all blown out with 165K on the whole car. Haven't noticed oil because I park in on grass 90% of time. So I don't know where to go from here.

It is a stock (mostly) 95 2.2 GT Vert Auto.

What would be my best course of action, have it rebuilt? 3GSTE (or other engine) swap? Trash it and start over? Rebuild it for turbo? I've heard the 2.2 if rebuilt is better than the 3gste if you do it right.

[HardHead93]

So I went to change my valve cover gasket and found my seals are all blown out with 165K on the whole car. Haven't noticed oil because I park in on grass 90% of time. So I don't know where to go from here.

It is a stock (mostly) 95 2.2 GT Vert Auto.

What would be my best course of action, have it rebuilt? 3GSTE (or other engine) swap? Trash it and start over? Rebuild it for turbo? I've heard the 2.2 if rebuilt is better than the 3gste if you do it right.

Speaking from personal experience I would do a swap to a 3sgte. I have tried to turbo the 5sfe and it is too much of a headache. A turbo'ed 5s is like having a race car you need to run a checklist on every time you get ready to drive it. Check out my build thread to see the nightmares I had before I decided to go 3sgte.

http://www.6gc.net/forums/index.php?showtopic=96700