![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jun 9, '16 From Minnesota Currently Offline Reputation: 0 (0%) ![]() |
Hello, my name is Toua Vang, I currently live in MN and have always been a Toyota my whole life.
Some of you know this car from before as this was previously snapshotgt's Celica. The story of acquiring the car: After my 5GC GTS and my S/T 20V AE102G, I was in the market for something unique (that's Toyota) and rust free so that meant travelling out of MN. Long story short, almost got a camry all-trac from the west coast or a 5gc from the east coast. Ended up in south coast to get Colin's 1MZ 6GC. 18 hour drive home and my very first ticket (speeding); totally worth it. First mod: 20mm/25mm spacers on the front/rear with the 7gc wheels. Nearly sits flush with the vehicle. ![]() ![]() ![]() ![]() Other things I have done so far: Audio system: A small sub and amp New intake filter: Coned shaped K&N filter to replace the old cylindrical one. Euro riser blocks: Reps from Teo, highly recommend his stuff. Wheels and tires: Fixed my brother's curb-rash 5-Zigen FN01RC and new paint w/ some new Yokohama S Drives. This post has been edited by TimeslideZ: Jan 22, 2022 - 3:02 PM |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jun 9, '16 From Minnesota Currently Offline Reputation: 0 (0%) ![]() |
Sorry for super late update on the photo's. Not the best photos or edits; but it's a work in progress!
Got some VIDEOS too; but still trying to figure out how to add them. I might just end up putting them on youtube. ![]() ![]() ![]() Shortly after this session I got a LOUD grinding sound from my left wheel bearing. Turns out I didn't properly press in both sides, so I ended up getting some hubs from a 97 ST at the local junkyard. Much rustier than the originals, but do they ride smoother. I'll re-do the original hubs whenever these go bad. No major updates so far; but cosmetically I changed the side markers to a set of clear depo one's I had and returned the 3rd clear trunk light to red. Did it so all the front light covers are clear and the rear is (mostly) red. Eventually I'll get some more Wolfie front clear turn signals again. Added some 194 LED's to the license plates, door lights, and side markers. This post has been edited by TimeslideZ: Oct 15, 2018 - 7:24 PM |
![]() ![]() |
Lo-Fi Version | Time is now: April 20th, 2025 - 9:41 PM |