Rebuild SSS (Super Strut Suspension), SSS Options

[Wild202]

I brought to you how I solved the problem with a thud on the suspension arms SSS.
I really like to use it SSS suspension arms, because I had the opportunity to compare with McPherson suspension, because like last machine was ST-202.
But after the purchase, I discovered a terrible knock on all the front suspension, which has been difficult to locate.
I started to deal with this problem.

This post has been edited by Wild202: Apr 13, 2018 - 3:20 AM

[asdrewq]

Fantastic work Wild202! This is a great service you are offering.

I have had some of the rebuilt arms from Poland, however they didn't last long before one started to fail; around 10k miles. To be fair they did send a replacement as it was within the 12 months guarantee, but after around 18 months the other side started knocking too.
I ended up eventually replacing them all with new from Toyota.

I suspect they don't open up the joints fully like you do & replace in their entirety, but use some sort of resin injection method to restore the main joints on the lower arm & fig 8, similar method to this: http://www.renewit.co.za/how-it-works.html

[Wild202]

Fantastic work Wild202! This is a great service you are offering.

I have had some of the rebuilt arms from Poland, however they didn't last long before one started to fail; around 10k miles. To be fair they did send a replacement as it was within the 12 months guarantee, but after around 18 months the other side started knocking too.
I ended up eventually replacing them all with new from Toyota.

I suspect they don't open up the joints fully like you do & replace in their entirety, but use some sort of resin injection method to restore the main joints on the lower arm & fig 8, similar method to this: http://www.renewit.co.za/how-it-works.html

Thank you.
I constantly do SSS suspension levers.
Just forget to upload photos here.
Soon I will do a couple more reports.