MS3PRO EVO on 4th Gen 3sgte Options

[HardHead93]

I just got my MS3PRO EVO in for my conversion to standalone on my 4th gen 3sgte. I am planning on taking my time with this install to make sure all the wiring is correct and clean looking. To help with the install I grabbed a 5sfe ECU and mounting hardware out of a junkyard car to use as a template for mounting the Megasquirt into the car.









Got relays, distribution blocks, and different color wiring for a clean centralized install.




My goal is to wire the ECU up for as many features as possible and once I get good tune running, start enabling the features. I spent the last few days reading the instruction manual and it has me excited with how much it can do.

This post has been edited by HardHead93: Sep 8, 2017 - 8:15 PM

[HardHead93]

To compare the differences between the MS3PRO EVO and the DIYPNP, I took screen shots of TunerStudio with each one's tuner file open. Here is the DIYPNP:


Here is the MS3PRO EVO:


As you can see the MS3PRO TunerStudio set up has a lot more features enabled. Based on the tabs at the bottom of the screen the MS3PRO has over double the amount of features and monitoring capabilities. This will allow me to set up a lot of goodies and safety features.