MS3PRO EVO on 4th Gen 3sgte Options

[HardHead93]

I just got my MS3PRO EVO in for my conversion to standalone on my 4th gen 3sgte. I am planning on taking my time with this install to make sure all the wiring is correct and clean looking. To help with the install I grabbed a 5sfe ECU and mounting hardware out of a junkyard car to use as a template for mounting the Megasquirt into the car.









Got relays, distribution blocks, and different color wiring for a clean centralized install.




My goal is to wire the ECU up for as many features as possible and once I get good tune running, start enabling the features. I spent the last few days reading the instruction manual and it has me excited with how much it can do.

This post has been edited by HardHead93: Sep 8, 2017 - 8:15 PM

[pitcelica]

Hi,

I did a MS3+MS3X install on a ST215 engine in my ST184 a few years ago. Here's the success story. I don't have the car anymore, but I can answer your questions if you have some.


http://www.msextra.com/forums/viewtopic.ph...t=3sgte#p275017

Have a good day!

Sam

[HardHead93]

Hi,

I did a MS3+MS3X install on a ST215 engine in my ST184 a few years ago. Here's the success story. I don't have the car anymore, but I can answer your questions if you have some.


http://www.msextra.com/forums/viewtopic.ph...t=3sgte#p275017

Have a good day!

Sam

Awesome! I will definitely be hitting you up with questions. Your MS forum post is what inspired me to do this ECU swap.

This post has been edited by HardHead93: Sep 17, 2017 - 3:02 PM