MS3PRO EVO on 4th Gen 3sgte Options

[HardHead93]

I just got my MS3PRO EVO in for my conversion to standalone on my 4th gen 3sgte. I am planning on taking my time with this install to make sure all the wiring is correct and clean looking. To help with the install I grabbed a 5sfe ECU and mounting hardware out of a junkyard car to use as a template for mounting the Megasquirt into the car.









Got relays, distribution blocks, and different color wiring for a clean centralized install.




My goal is to wire the ECU up for as many features as possible and once I get good tune running, start enabling the features. I spent the last few days reading the instruction manual and it has me excited with how much it can do.

This post has been edited by HardHead93: Sep 8, 2017 - 8:15 PM

[HardHead93]

I got my ignition timing set. I had to make a 3 degree adjustment but besides that no problems. I am working on getting all the extra features enabled. I got my intercooler fan to turn on based on intake temperature and I am wiring in my extra sensors. Right now I am stuck because I cannot seem to get the warning light to turn on. I have run it through a relay to supply 12V to the pin but it will not turn on. I hear the relay click but besides that nothing.