MS3PRO EVO on 4th Gen 3sgte Options

[HardHead93]

I just got my MS3PRO EVO in for my conversion to standalone on my 4th gen 3sgte. I am planning on taking my time with this install to make sure all the wiring is correct and clean looking. To help with the install I grabbed a 5sfe ECU and mounting hardware out of a junkyard car to use as a template for mounting the Megasquirt into the car.









Got relays, distribution blocks, and different color wiring for a clean centralized install.




My goal is to wire the ECU up for as many features as possible and once I get good tune running, start enabling the features. I spent the last few days reading the instruction manual and it has me excited with how much it can do.

This post has been edited by HardHead93: Sep 8, 2017 - 8:15 PM

[slavie]

So which 850CC injectors are these? What did they cost? I see you had to get them with plug adapters.

[HardHead93]

So which 850CC injectors are these? What did they cost? I see you had to get them with plug adapters.

They are Bosch EV14 850 fuel injectors. Attached are the test results I received with these injectors.
https://s6.postimg.org/llj9expn5/850cc_Injector_Specs140.jpg
They cost me $290 for all 4. They came with the adapter plugs and the proper O-rings for it to fit into the head and the fuel rail. You can buy these injectors on Amazon for about $40-50 a piece but they come with the wrong o-rings and no adapter plugs. The seller I went through on Ebay puts it all together for you. 1000cc injectors are going for around $400 for a whole set so the pricing seemed about right. Here is the link if you are interested.
https://www.ebay.com/itm/Toyota-Celica-MR2-...6298609?vxp=mtr
These injectors only work for the gen 3 and gen 4 3sgte.

[HardHead93]

So which 850CC injectors are these? What did they cost? I see you had to get them with plug adapters.

They are Bosch EV14 850 fuel injectors. Attached are the test results I received with these injectors.
https://s6.postimg.org/llj9expn5/850cc_Injector_Specs140.jpg
They cost me $290 for all 4. They came with the adapter plugs and the proper O-rings for it to fit into the head and the fuel rail. You can buy these injectors on Amazon for about $40-50 a piece but they come with the wrong o-rings and no adapter plugs. The seller I went through on Ebay puts it all together for you. 1000cc injectors are going for around $400 for a whole set so the pricing seemed about right. Here is the link if you are interested.
https://www.ebay.com/itm/Toyota-Celica-MR2-...6298609?vxp=mtr
These injectors only work for the gen 3 and gen 4 3sgte.

Word of warning, I put these injectors in and they run great but they are loud. They make a ticking noise at idle but goes away when driving the car.

[slavie]

Word of warning, I put these injectors in and they run great but they are loud. They make a ticking noise at idle but goes away when driving the car.

Just have to drive flat out from now on, what's the problem? If you ever get pulled over, present your very reasonable explanation, the officer will understand.