TSZ 1MZ-FE, The project car |
TSZ 1MZ-FE, The project car |
Apr 22, 2017 - 3:49 PM |
|
Enthusiast Joined Jun 9, '16 From Minnesota Currently Offline Reputation: 0 (0%) |
Hello, my name is Toua Vang, I currently live in MN and have always been a Toyota my whole life.
Some of you know this car from before as this was previously snapshotgt's Celica. The story of acquiring the car: After my 5GC GTS and my S/T 20V AE102G, I was in the market for something unique (that's Toyota) and rust free so that meant travelling out of MN. Long story short, almost got a camry all-trac from the west coast or a 5gc from the east coast. Ended up in south coast to get Colin's 1MZ 6GC. 18 hour drive home and my very first ticket (speeding); totally worth it. First mod: 20mm/25mm spacers on the front/rear with the 7gc wheels. Nearly sits flush with the vehicle. Other things I have done so far: Audio system: A small sub and amp New intake filter: Coned shaped K&N filter to replace the old cylindrical one. Euro riser blocks: Reps from Teo, highly recommend his stuff. Wheels and tires: Fixed my brother's curb-rash 5-Zigen FN01RC and new paint w/ some new Yokohama S Drives. This post has been edited by TimeslideZ: Jan 22, 2022 - 3:02 PM |
May 8, 2018 - 8:31 PM |
|
Enthusiast Joined Jun 9, '16 From Minnesota Currently Offline Reputation: 0 (0%) |
Finally got a heat gun, and borrowed my cousins fender roller equipment. HOPEFULLY it helps my rubbing problem w/ the new wheel setup.
Trying to roll up the front, or at least what I can get of it. Passenger side done so far, stopped caused I cracked the paint and was pissed at myself. Also finally removed the v6 emblem from my trunk; but you can still see some of the adhesive residue. I'll wash that out later. 15mm spacers have been order and waiting for those to come in. |
Lo-Fi Version | Time is now: July 2nd, 2024 - 7:41 PM |