 7AFE to 3SGE (non beams/turbo) Conversion, Is there anything that needs to be done to the loom? |
 Aug 20, 2018 - 11:04 AM
|
 
|
|
Enthusiast Joined Dec 23, '15 From Ireland Currently Offline Reputation: 1 (100%)  |
So I have a 3SGE with box, loom, shafts, ecu. Basically to do a straight swap into the 7AFE celica but curious to know if there is anything with the wiring i need to adjust. Trying to find details on it and its very hard to find anything. Any help would be appreciated.
As far as I can tell, its just dump straight in. I am aware of the engine mount being different, that's ok. Just the electrics I am more concerned about. Thanks in advance 
|
 |
Replies
|
Sep 17, 2018 - 8:07 AM
|
|
 Enthusiast  Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
IIRC, if there is no signal from the temp sensor to the fans, they fail to the ON position. My GT4 was the same way due to a broken wire at the connector.
-------------------- ~bloodMoney
 |
Posts in this topic
Makarintosh 7AFE to 3SGE (non beams/turbo) Conversion Aug 20, 2018 - 11:04 AM
njccmd2002 there are a few guys here that have done the swap ... Aug 27, 2018 - 8:35 PM Makarintosh Thanks for that the swap was a success! Car r... Sep 16, 2018 - 2:07 AM
njccmd2002 QUOTE (Makarintosh @ Sep 16, 2018 - 2... Sep 17, 2018 - 5:23 PM Makarintosh QUOTE (njccmd2002 @ Sep 17, 2018 - 6... Sep 29, 2018 - 2:05 PM Smaay if I remember correctly, the water temp sensor was... Sep 26, 2018 - 7:02 PM Makarintosh QUOTE (Smaay @ Sep 26, 2018 - 8:02 P... Sep 29, 2018 - 2:08 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 20th, 2025 - 12:10 PM |