7AFE to 3SGE (non beams/turbo) Conversion, Is there anything that needs to be done to the loom? Options

[Makarintosh]

So I have a 3SGE with box, loom, shafts, ecu. Basically to do a straight swap into the 7AFE celica but curious to know if there is anything with the wiring i need to adjust. Trying to find details on it and its very hard to find anything. Any help would be appreciated.

As far as I can tell, its just dump straight in. I am aware of the engine mount being different, that's ok. Just the electrics I am more concerned about.

Thanks in advance

[Smaay]

if I remember correctly, the water temp sensor was backwards polarity to the 7A and 5S/3S in other words when one is open, the other is closed. and the computer gets confused.

[Makarintosh]

if I remember correctly, the water temp sensor was backwards polarity to the 7A and 5S/3S in other words when one is open, the other is closed. and the computer gets confused.

But all of the engine wiring and ECU is from the 3SGE. Unless its down to the engine bay wiring that connects the lights etc? is there another sensor that goes to the radiator along with the sensor water temp sensor under the throttle body?