6G Celicas Forums

Welcome Guest ( Log In | Register )

> New Brake Master Cylinder Needed??, diagnosis inside
post Apr 11, 2020 - 6:35 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




I replaced my brake master cylinder with a new Raybesto unit as well as a new proportioning valve (OEM). My problem is I will get air pockets 5 min into driving, pedal sinks momentarily and then brake feel is back to normal

While bleeding brakes, once i crack a caliper open, air bubbles do not come out till about 10 seconds later.

-Booster Operating check OK
-Booster Air Tightness check – engine off OK
-Booster Air Tightness underload OK
-No Leaks at Banjo Bolts
-Soft Lines OK
-No rust between shims and pads
-Caliper Pistons Seals not torn or leaking
-Caliper Pistons move freely when pressed inward with bleeder valve open


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514
 
Start new topic
Replies
post Apr 13, 2020 - 4:45 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




the only caliper i can't get rid of air from, is the Right Front Caliper. all others are fine.

This post has been edited by BonzaiCelica: Apr 13, 2020 - 4:45 PM


--------------------
Group buy to replicate Narrow E series transaxle parts

http://www.6gc.net/forums/index.php?showto...p;#entry1107514

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 13th, 2025 - 6:34 AM