Wiring Diagrams, For security etc |
Wiring Diagrams, For security etc |
Apr 5, 2004 - 12:29 PM |
|
Enthusiast Joined Apr 4, '04 From VA, USA Currently Offline Reputation: 0 (0%) |
DISCLAIMER: This wiring information is being provided on an "as is" basis, without any representation or Warranty. Is is your responsibility to Verify the wires by testing them
With that said....Lets get goin FYI: You will not need all the wires that I post, read your instructions ADMIN: please sticky this This post has been edited by Pali_playa: Apr 5, 2004 - 1:06 PM |
Apr 5, 2004 - 12:43 PM |
|
Enthusiast Joined Apr 4, '04 From VA, USA Currently Offline Reputation: 0 (0%) |
1994 Toyota Celica
Item Wire Color Polarity Wire Location 12V White- Brown/Red + Ignition Harness Starter Black/White + Ignition Harness Ignition Black/Orange + Ignition Harness Second Ignition Blue/Red + Ignition Harness Accessory Gray + Ignition Harness Power Lock Blue/Back - Lock Module right of column Power Unlock Blue and Green *1 - Lock Module right of column Parking Lights + Dk. Green At Dimmer Parking Lights - Lt. Green Steering Column Headlights Red/Black - Steering Column Door Trigger Red/White - Drivers Kick Panel *2 Trunk/Hatch Pin Red/Green - Drivers Kick Panel *2 Tachometer Gray Check Connector Brake Wire Green/White + Driver Kick Panel Horn Trigger Green - Steering Column LF Window up/down Green - Red Drivers Door Switch RF Window up/down Grn/Wht - Red/Blu Driver Kick Panel LR Window up/down RR Window up/down *1 Use both wires and diode isolate each. *2 Door and trunk trigger looped out of main harness heading towards rear of car, almost directly below door hinge wrapped in beige tape This post has been edited by Pali_playa: Apr 5, 2004 - 12:58 PM |
Lo-Fi Version | Time is now: November 24th, 2024 - 9:01 PM |