 Front Rotor Removal |
 Apr 17, 2004 - 2:57 PM
|
 
|
|
Enthusiast Joined Feb 4, '03 From Birmingham United Kingdom Currently Offline Reputation: 0 (0%)  |
Anyone know how the front rotor comes off ? (1995 6th Gen Jap Import).
As I need to take it off to replace a snapped wheel stud. I've heard that they just slide off, or if they are a bit tight there are some tapped holes where you insert a couple of bolt's, then you tighten the bolt's up & the rotor gradually comes off. Is this the correct way ? I've tried this way but the bolt's feel tight & I don't want to snap them. Or has anybody got any other idea's. Thanks in advance guy's. 
|
Posts in this topic
LatinKraze I used a hammer Apr 17, 2004 - 2:59 PM ghostdog use the bolt. its so much easier than hammering aw... Apr 17, 2004 - 3:37 PM Junior take a hammer and bang it a couple of times. you ... Apr 19, 2004 - 10:39 AM
phat94celi Dont hit the rotor surface or the studs with the h... Apr 19, 2004 - 6:01 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 6:22 PM |