JDM Mirrors, need help installing Options

[Neipas09]

I bought some JDM Rear-view mirrors off ebay and they supposivly came off a 96 celica so no problems bolting on. I know this cause they are already on my car. Looks funny too, red mirrors on a black car, very mexican of me.
Anyways, i'm having trouble getting all the wires hooked up and i was wondering if anyone has installed some themselves or had them installed and could tell me what the extra wires that don't match up with the controller go.

Thanks
Joel

[jontechie]

Are you talkin bout the motorised/ folding door mirrors?
I had to replace one of my mirror units a couple of months ago because
the shafts holding the gears in the motorised unit had worn their way
through the plastic moulded shaft holders, anyways the replacement
I obtained I think had an extra 2 cables and the connector was different.
If yours is the same then all you have to do is check that the series of
colours on the cables of the old unit match all those on the new unit( with
exception of the spare ones).What I did was cut the connector of the old
unit (with enough slack cable) and wire it onto the new unit( colours matching).The 2 spare cables can be left trimmed with no connection, and the mirror unit will work with no problems. Note that my car is a JDM GT4 and the mirror unit was from a later model 6 gen celica. But I believe the colour coding is pretty much standard across the board...