6G Celicas Forums

Welcome Guest ( Log In | Register )

> help is this ECU gonna work?, 7afe celi ecu in rolla (tranny swap)
post May 16, 2004 - 12:06 AM
+Quote Post
cleanrolla97dx



Enthusiast

Joined Jan 20, '04
From TN
Currently Offline

Reputation: 0 (0%)




ok check it out

i have a 97 corolla with the wonderful 7afe
i have an auto w/ overdrive
i am starting to collect parts to do a manual swap
i found this ECU on ebay
CLICK HERE TO SEE WHAT IM TALKING ABOUT

it says in the description that it will work in a 94-95 celi im an guessing that the ecu will not work due to the fact the ecu is OBD-I and my car is OBD-II
toyota changed over to OBD-II in 96 on the 7afe in the corolla's but im not sure if it was the same year for the celica's
i guess it would work as far as the transmission is concerned but the rest of the car wolud probably be fuct

BTW before any one asks why im getting an ECU for a tranny swap,
the 4 spd auto w/ od is electronically controlled bythe ECU it wont work without the ecu from a manual car


any help i greatly appreciated in advance

later,
JAY
 
Start new topic
Replies
post May 17, 2004 - 1:23 AM
+Quote Post
toyotaspeed_90

Enthusiast
**
Joined Jan 22, '04
From bellingham, WA
Currently Offline

Reputation: 0 (0%)




at least a 3 speed auto... which isn't electronically controlled... why would it matter? since the driver is doing the manual changing, the ecu doesn't care what gear the car is in..... and as far as the TPS, it'll only read whatever the TPS is sending it....

like i said, racer25 had his corolla running w/ the auto ecu and a manual gearbox after he swapped....

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 11th, 2024 - 2:22 AM