I need a how to for a starter, 95 ST ...? Options

[Batman722]

anyone replace their starter in an ST ? I would love some info if you got it. I really don't want to pay to have it put in

thanks

[nicksceli]

i just replaced mine this weekend. it was very easy. first disconect the battery(10mm socket). after that you will need to take out the two bolts holding it in place. for the one you will need a 14mm wrench and the other you will need a swivel socket also 14mm. one bolt is facing the drivers side fender the other on is facing the opposite way. use the wrench for the one facing the drivers side and the swivel of the other side. make sure you have a good grip on it before you take the second bolt out. after its out twist it around so you can see where the wires attach. its a good idea toy have a 12mm socket handy cause theres not really anwhere to set it down without stretchign the wires. use the 12mm socket to disconnect the one wire and the other should just be a clip. after that just do thouse steps backwards and you will be done in no time. it wook me about an hour to do because i cant get under the car because of the kit and springs and i also had the gf standing there asking what every damn part and wire was and what it did. good luck doing it if you need more info let me know