 Window positioning |
 May 28, 2004 - 7:47 PM
|
 
|
|
Enthusiast Joined May 20, '04 From Saskatoon, SK, Canada Currently Offline Reputation: 0 (0%)  |
Hey guys,
I had an air leak in my passenger side window so I had to move it around a bit. (I think it was put in the wrong place when the doorlock was repaired) I've stopped the air leak, but now as I close the door, the window ever-so-slightly makes contact with the front of the plastic piece of the quarter panel window. When the door is in its final closed position, the window appears to be in the correct place - about 1/8 inch away from the plastic piece. My concern is that in the winter, the brittle plastic piece may break when the window brushes it on the way in. I don't know anybody else with a 6th gen that I can look at... should the window touch the plastic of the quarter window while it's closing? Thanks Kevin |
Posts in this topic
presure2 ive had almost hte same problem since my pass side... May 29, 2004 - 7:51 AM Jeremy1210 take off the door panel and adjust the rear bolt t... May 29, 2004 - 12:22 PM Coomer Yeah, there are a couple bolts that may behind som... May 29, 2004 - 8:45 PM kgr-gts thanks for the info.
I tried to adjust the window... May 29, 2004 - 11:53 PM macavely get some one to help you out when you do that.. h... May 30, 2004 - 12:03 AM kgr-gts that's weird. you make it sound like the wind... May 30, 2004 - 12:49 AM macavely just make sure it the 2 bolts that are inside the ... May 30, 2004 - 1:27 AM Jeremy1210 there should be 2 bolts that adjust the window, no... May 30, 2004 - 10:48 AM kgr-gts aren't the window stops only used for adjustin... May 30, 2004 - 11:36 AM
Jeremy1210 as far as moving forward, I don't know, but co... Jun 1, 2004 - 9:19 PM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 3:22 PM |