Window positioning Options

[kgr-gts]

Hey guys,

I had an air leak in my passenger side window so I had to move it around a bit. (I think it was put in the wrong place when the doorlock was repaired)

I've stopped the air leak, but now as I close the door, the window ever-so-slightly makes contact with the front of the plastic piece of the quarter panel window.

When the door is in its final closed position, the window appears to be in the correct place - about 1/8 inch away from the plastic piece. My concern is that in the winter, the brittle plastic piece may break when the window brushes it on the way in.

I don't know anybody else with a 6th gen that I can look at... should the window touch the plastic of the quarter window while it's closing?

Thanks

Kevin

[Coomer]

Yeah, there are a couple bolts that may behind some clear plastic covering to adjust the window. I had to do this when I got my power window kit, because on the passenger side the window would go up too high and the door wouldn't close easily.