Window positioning Options

[kgr-gts]

Hey guys,

I had an air leak in my passenger side window so I had to move it around a bit. (I think it was put in the wrong place when the doorlock was repaired)

I've stopped the air leak, but now as I close the door, the window ever-so-slightly makes contact with the front of the plastic piece of the quarter panel window.

When the door is in its final closed position, the window appears to be in the correct place - about 1/8 inch away from the plastic piece. My concern is that in the winter, the brittle plastic piece may break when the window brushes it on the way in.

I don't know anybody else with a 6th gen that I can look at... should the window touch the plastic of the quarter window while it's closing?

Thanks

Kevin

[macavely]

get some one to help you out when you do that.. have the hold the window and then losen all the bolts.. then adjust the window.. there should me marks on the door that show you were all the bols should line up.. once you find that.. your window should be set.. tighten all the bolts.. till the windw doesn't wiggle at all.. then your set..