trying to locate my old 6th gen |
trying to locate my old 6th gen |
Jun 22, 2004 - 4:25 PM |
|
Enthusiast Joined Jun 22, '04 From Bay Area Currently Offline Reputation: 0 (0%) |
Hi.. i was hoping if anyone has seen this 94 red celica and could point me in the right direction as to finding out the contact information to the owner.. i used to own this celica and had sold it about 3 or 4 years ago to move up to something bigger and better.. and was wondering as to how my old celica was doing.. i must admit that i miss my celica at times but i'm convinced that i made the right choice.. the new or as i should say current owner lives in the Bay Area in California... TIA
Brian 94 red celica my current car This post has been edited by 95jza80tt: Mar 10, 2008 - 12:33 AM |
Jun 27, 2004 - 4:41 PM |
|
||
Enthusiast Joined Apr 28, '03 From SoCal Currently Offline Reputation: 1 (100%) |
From I-Supra.com BPU- "Basic Performance Upgrade". These modifications are: A full length three inch down-pipe (with or with-out a high flow catalytic converter), 3” (75mm) or bigger cat-back exhaust system, raised boost (18psi), and the required boost cut eliminator (GReddy BCC) needed to achieve that boost without activating the factory fuel cut-off at 14-15psi. the + mean when someone says BPU+ ,And APU. That stands for any additional power producing modifications other than the basic BPU™ modifications. One "+" refers to Adj. Cam Gears and under-drive pulleys, the second "+" refers to a Fuel controller, ECU upgrade, etc. For instance, a Supra with the BPU™ modifications, plus a front-mount intercooler, would be called BPU™+. If you added cam gears to that, it would be BPU™++, and so on. The "BPU™" term is used until you have an upgraded turbo(s). Then it is referred to as APU, advanced performance upgrades. This designation pretty much covers every modification that can be performed. Anthony |
||
Lo-Fi Version | Time is now: December 12th, 2024 - 11:33 AM |