6G Celicas Forums

Welcome Guest ( Log In | Register )

> NO Way 3sgte would work!, so my Mechanic says....?
post Jul 12, 2004 - 7:43 PM
+Quote Post
Guest_DJMC_Celica_*











So i was having a interesting convo online with my buddy who i plan on having do my engine clip but then he had this to say!....

QUOTE
HOTAZZDJ26: you know how to do a front engine clip?
NcSupra: yes
HOTAZZDJ26: On my car?
NcSupra: what kind of engine do you want?
HOTAZZDJ26: 3SGTE!
HOTAZZDJ26: Gen 3
NcSupra: that wont work
HOTAZZDJ26: yes it will
HOTAZZDJ26: i allready scoped it out, i just need a mechanic to put it in
NcSupra: dude your car is front wheel drive
NcSupra: belive me I know everything about that engine
HOTAZZDJ26: hang on
NcSupra: you would need a trany swap also
NcSupra: to a six speed
NcSupra: and the ecu
HOTAZZDJ26: ok hang on
NcSupra: along with the room for exhaust
HOTAZZDJ26: http://www.6gc.net/forums/index.php?showtopic=1448
HOTAZZDJ26: check out feasible and non feasible
NcSupra: dude yeah ok go ahead and change the front of your frame
NcSupra: your nuts man
HOTAZZDJ26: what do you mean it says you can drop it right in?
NcSupra: dude you cant
HOTAZZDJ26: It drops right in to your Celica, assuming you have a ST202, ST203, or ST204(Which is the USDM GT.) Even if you have a ST(Chassis code AT200), you can still swap this engine into your car. It will just take a bit more work, because you'll need to change motor mounts and your transmission, and a few other things.
NcSupra: trust me on this
HOTAZZDJ26: i trust you its just i hear so much on the forum
NcSupra: dude someone has something messed up
HOTAZZDJ26: why?
NcSupra: that engine is an inline 6 you cant mount it that way
HOTAZZDJ26: so i would need to switch my whole Tranny, Shifter, and frame?
NcSupra: ha ha dude keep going
NcSupra: well over 15,000 worth of cash way over
HOTAZZDJ26: so whats a feasible engine you would suggest?
HOTAZZDJ26: or should i NOS it and keep rebuilding my engine
NcSupra: ha ha
HOTAZZDJ26: what do you suggest MAD SCIENTIST?!
HOTAZZDJ26: hahaha
NcSupra: dude your crazy
HOTAZZDJ26: i need to get at least 220hp
HOTAZZDJ26: im at 140
HOTAZZDJ26: hahaha
HOTAZZDJ26: have you seen my car recently?
NcSupra: mill the head and get everything titanium
NcSupra: yes
HOTAZZDJ26: what do you mean? english please?
NcSupra: if you get the head milled it will higher your compresion but lower yout liter it will ad torque and hp
HOTAZZDJ26: how much?
NcSupra: money?
HOTAZZDJ26: both how much HP, and how much $
NcSupra: dude titanium **** money man
NcSupra: mill the head bore out the cylinders and hone them and that would be a start
HOTAZZDJ26: so u saying i should scrap the celi and go for a supra?
NcSupra: dude i gotta run man Ill start this later
HOTAZZDJ26: ok
HOTAZZDJ26: peace


So what do you guys think??? Is this true, i am looking at 15,000Gs??? Let me know?

Thanks,
DJMC

This post has been edited by Coomer: Jul 13, 2004 - 12:54 PM
 
 Start new topic
Replies
post Jul 13, 2004 - 11:50 PM
+Quote Post
shid



Enthusiast
*****
Joined Jan 8, '04
From LA
Currently Offline

Reputation: 0 (0%)




10Gs? To wire it up to OBDII?

OBD II gets its information from the ECU, so as long as the wiring is done right, you have OBDII anyway Natalie.

Turbo, intercooler, new manifold, etc will run an extra 2Gs roughly

So, a really NICE 3sgte setup is about 6 thousand with labor, 4500 without

Posts in this topic
- DJMC_Celica   NO Way 3sgte would work!   Jul 12, 2004 - 7:43 PM
- - Jeremy1210   You are correct DJMC. your buddy is wrong. The 3sg...   Jul 12, 2004 - 7:51 PM
- - DJMC_Celica   Yeah i hear ya, he has a 4th gen. But see i dont k...   Jul 12, 2004 - 7:56 PM
- - macavely   a 3sgte will not run you 15k to buy and install.. ...   Jul 12, 2004 - 7:58 PM
- - jgreening   tell Mina or Kuya that a 3rd gen 3sgte wont fit in...   Jul 12, 2004 - 8:02 PM
- - Doge   I wouldn't trust that guys...he says he knows ...   Jul 12, 2004 - 8:34 PM
- - shid   Wow, that guy's an idiot. Or, he might be thi...   Jul 12, 2004 - 8:45 PM
- - DJMC_Celica   HAHAAHAHAHA you guys are too funny, i love you guy...   Jul 12, 2004 - 8:49 PM
- - initialdrift55   jesus can someone give ure "mechanic" th...   Jul 12, 2004 - 10:33 PM
- - macavely   QUOTE (initialdrift55 @ Jul 12, 2004 - 10:33 PM) j...   Jul 12, 2004 - 10:50 PM
- - celicaman96   QUOTE (macavely @ Jul 12, 2004 - 8:50 PM) or just ...   Jul 12, 2004 - 11:46 PM
- - Sh0gunkid8721   There are LOTS of people doing the swap on this si...   Jul 12, 2004 - 11:50 PM
- - DJMC_Celica   So listen to this, he calls me up and says, look i...   Jul 13, 2004 - 9:24 AM
- - Coomer   So now that this guy won't do it, are you goin...   Jul 13, 2004 - 10:03 AM
- - XXX_Mina   coomer , did you delete my reply?? or did it not j...   Jul 13, 2004 - 12:56 PM
- - Jeremy1210   I vdon't know if I would want this guy working...   Jul 13, 2004 - 5:43 PM
- - uzthedentist   He seems quite confused, his name is supra and hes...   Jul 13, 2004 - 6:11 PM
- - macavely   he sounds like those mechanics that haven't wo...   Jul 13, 2004 - 6:58 PM
- - 97Celica   I am going to take out a loan I think just to get ...   Jul 13, 2004 - 7:22 PM
- - drdos   wow that dude is a dumbass. you seriouly need to t...   Jul 13, 2004 - 11:28 PM
- - BlackCelicaGT94   10 g's is the quote i got too..but thats cuz t...   Jul 13, 2004 - 11:32 PM
- - BlackCelicaGT94   basically what u get is the engine and u work from...   Jul 13, 2004 - 11:36 PM
- - shid   10Gs? To wire it up to OBDII? OBD II gets its in...   Jul 13, 2004 - 11:50 PM
- - BlackCelicaGT94   my bro has 2 porsche intercoolers for his supra so...   Jul 14, 2004 - 11:49 AM
- - shid   Sure, if you wanted them to be. You can get a gred...   Jul 14, 2004 - 11:55 AM
- - Coomer   I think what Natalie's saying though is that h...   Jul 14, 2004 - 12:07 PM
- - shid   yeah, I don't doubt   Jul 14, 2004 - 12:21 PM
- - uzthedentist   best is to get a custom ic, then you can specify t...   Jul 14, 2004 - 12:59 PM
- - kuya1284   QUOTE (DJMC_Celica @ Jul 12, 2004 - 5:43 PM) So i ...   Jul 14, 2004 - 2:16 PM
- - jgreening   Ray: We have missed you man. How's the car c...   Jul 14, 2004 - 4:23 PM
- - kuya1284   QUOTE (jgreening @ Jul 14, 2004 - 2:23 PM) Ray: W...   Jul 14, 2004 - 6:26 PM
- - Mr7AFE   thats just crazy... seek help elsewhere...   Jul 15, 2004 - 12:26 AM

« Next Oldest · Engine/Transmission/Maintenance · Next Newest »
 

Reply to this topicStart new topic
10 User(s) are reading this topic (10 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

Lo-Fi Version Time is now: February 24th, 2025 - 8:03 PM
Powered By IP.Board © 2025  IPS, Inc.