![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Nov 24, '03 From MA Currently Offline Reputation: 0 (0%) ![]() |
When I changed my oil for the first time, I noticed that while the manual says to put in something like 4 quarts, I actually drained about 5 quarts of existing oil. After 3000 miles, could that much extra oil damage something... like, oh, I don't know... the valve seals? I know you guys say the valve seals are a common problem, but it's a problem the car didn't have at the time I bought it, and I've only put about 3000 miles on it since then (most of which was during the time it had too much oil.)
Comments? Questions? Concerns? Donations? Thanks. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 25, '04 From Wisconsin Currently Offline Reputation: 0 (0%) ![]() |
I'm normally around 4.5 qts. Basically, 4 qts is "low" on the dipstick and 5 is "high." 4.5 is middle. Its not bad unless its way over high. Then you'll get blue smoke out that back as the oil is burning inside the engine! w00t. Your valve seals should be alright. If you so inclined, take off the valve cover and replace the valve cover seal and valve seals.
|
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 2:07 AM |