![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 19, '04 From austin tx Currently Offline Reputation: 1 (100%) ![]() |
I just put in a 200w pioneer amp to power my MB quarts in the front. I have an EQ on my headunit, and i have it adjusted so i can just change the bass and treble depending on what i want to listen to. My problem is that when i have my bass up and the stereo playing pretty loud, my amp cuts out. The low pass filter is off, gain at normal, and its running to crossovers. Any ideas as to why it cuts out on me? BTW, i thought it was my ground, but it looked fine. I re-did the ground anyways, but its still doing the same thing.
Thanks -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 19, '04 From austin tx Currently Offline Reputation: 1 (100%) ![]() |
The sub amp is not the one cutting out. Its a pioneer, 760w max, 380w RMS, running it at 4ohms bridged. Ive got 8g wire running to the amp for the fronts, its a pioneer as well.
My headlights barely dim, if at all, but I also did new grounds (off of the battery and in the engine bay) with 4g wire. Ill check the voltage when i get a chance. 12v under idle? I really dont know why it would just cut out for 2 seconds at a time. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 2:16 AM |