 bolts to remove the crankshaft pulley |
 Aug 10, 2004 - 12:20 AM
|
 
|
|
Enthusiast  Joined Dec 2, '03 From Virginia Currently Offline Reputation: 0 (0%)  |
Does anyone have the specs on the bolts used to retain/remove the crankshaft pulley on the 5sfe. On the pulley there are two holes on either end and these are used to base a prybar when breaking loose the pulley bolt, and then used again to hook upto a harmonic puller to pull the pully off of the crank. The toyota manual just says use one of their tool, which I don't want to buy. Does anyone know what bolts they used to fit in those holes? thanks.
|
 |
Replies
|
Aug 11, 2004 - 8:19 AM
|
|
|
Enthusiast Joined Dec 2, '03 From Virginia Currently Offline Reputation: 0 (0%) |
I got it off last night. I had my dad jam the fly wheel with a prybar up against one of the dowels that the transmission that slips on. and put a breaker bar to it. I just have a cheap electric impact that only has 240 ft*lbs on it so it couldn't take it off. I guess if you have one of those 3/4" 600 ft*lbs it'll come off nice and easy.
|
Posts in this topic
Snarfer bolts to remove the crankshaft pulley Aug 10, 2004 - 12:20 AM
Kwanza26 Don't have to use those holes... get a pronged... Aug 10, 2004 - 1:20 AM Snarfer Oh ya I hadn't thought about that, I do have a... Aug 10, 2004 - 8:37 AM pxcr440 i think i spent 2 hours working on that bolt to ta... Aug 11, 2004 - 1:37 AM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 1:03 PM |