 HEHE |
 Sep 2, 2004 - 1:44 AM
|
 
|
|
Enthusiast  Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)  |
   oh yea.. got to keep the foglights 
--------------------  99 project version 3.0.. hello SEMA 2010 =) |
 |
Replies
|
Sep 2, 2004 - 12:35 PM
|
|
||||
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
they run straight back.. basially a 90 degree angle from the core.. I had to cut away some of the sheet metal on the sides of the radiator.. not the radiator itself but next to it... the passanger side (cold side is a staight pipe thats appox 2.5 outlet) the hot side (driver) I will have to relocate the freon tank over 2 inches.. the inlet is oval shaped but with a coupler it seals nice... it angles sligtly upwards and plan on running the piping under the battery tray thing (not sure of the name for it) Im gonna run some of the piping this weekend and relocate the freon tank so I will post some pics of all that stuff when I get it done.
not at all.. I did have some problems mounting it to the support bar.. tried welding it but my welder sucks and couldn't get enuf penatration threw the powdercoating on the support beam, and was too lazy to sand it all down.. also tried to make some brakets for it but didnt think they would of held up in the long run.. right now I have it temp mounted with that JB weld stick stuff.. which is working for now but gonna have to figure something else out when I get a little further along. edit: here are pics of the holes I had to cut.. there not very clean cuts right now cuz I was in a hurry and I was having problems with my dremel.. the cut off wheel that I have the little screw is worn down so the discs keep spinning and breaking on me so I just quicked it.. im gonna clean it up this weekend this is the driver side.. this is the only relocation I think I need to do.. will find out later if theres more but should be able to work around nething else, might just end up removing the A/C unit completely  this is the pass side.. straight shot threw  This post has been edited by NEVERSTOP: Sep 2, 2004 - 12:45 PM -------------------- 99 project version 3.0.. hello SEMA 2010 =) |
||||
Posts in this topic
NEVERSTOP HEHE Sep 2, 2004 - 1:44 AM
Kwanza26 So... this is your new Celica? Sep 2, 2004 - 1:55 AM Magic PERFECT FIT!!!!! Sep 2, 2004 - 2:00 AM NEVERSTOP YEP
Curretly workin on a 5sfte project on it.. ... Sep 2, 2004 - 2:00 AM doGGy wooohaa.... nice looking Sep 2, 2004 - 2:27 AM goatrunner looking good and yes they fog lights are a must ha... Sep 2, 2004 - 4:20 AM BlakDeth Did you have to alter the FMIC at all? Sep 2, 2004 - 4:23 AM lagos where are the inlets on the intercooler? that just... Sep 2, 2004 - 7:43 AM x_itchy_b_x the inlets go backwards on the sides of the radiat... Sep 2, 2004 - 8:15 AM 97sccelica nice
every car looks better when it has a FMIC Sep 2, 2004 - 10:13 AM
 |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 15th, 2025 - 1:00 PM |