6G Celicas Forums

Welcome Guest ( Log In | Register )

> OH MY GOD!, Argh! I hate my mechanic!
post Sep 2, 2004 - 3:24 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




So on Sunday I drove my car to my mechanic's shop so that I could do my clutch install myself in his garage using his tools, since I no longer have any tools because they got stolen. This was the same mechanic who did my swap, but I had no intention of having him touch the car. Well it turns out that I'm 100% completely mechanically retarded...at the end of the day I didn't even have both axles out of the car. frown.gif

And since it was in the shop's main bay and my mechanic had to have it out of there and I had to work, I couldn't continue on it and had to pay him to do my clutch installation. So I got my car back today and took it for a drive...it is now so screwed up it's ridiculous. Now I have to hold the wheel ten degrees or so clockwise to drive straight! mad.gif

I also have a new paint chip on the side of my door from my mechanic hitting the door with something, and my front brakes squeal when I come to a stop. It's so ridiculously sick how retarded my mechanic is. My car was fine except for a bad throwout bearing due to my mechanic being a retard and using the wrong one on my tranny. Now it doesn't drive straight and my brakes squeal. mad.gif

I just don't even know what to do anymore...my car used to be nice...now look at it...it's a piece of garbage...I don't even think I could sell this car anymore. frown.gif


--------------------
New Toyota project coming soon...
 
Start new topic
Replies
post Sep 2, 2004 - 3:53 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




QUOTE (sphinx @ Sep 2, 2004 - 1:48 PM)
to take off the axles, you just take off the wheels, the 2 bolts that hold the hub and the strut together, and then the main NUT that holds the axle in place with the hub. I believe the 2 bolts on the strut are 17MM and the one on the axle/hub is a 24MM

As for the strearing wheel, my buddy here knows how to fix that. I've never had that problem, but he says it real easy. I'll ask him how to do it

Thanks for the info. Sounds good...do you know if it's normal for your steering wheel to be off when taking off the axles and stuff and putting them back on? I didn't have this problem when I got the car back after the swap, but my mechanic thinks that because we changed the power steering pump as well, there's some sort of an air pocket in the line and I just need a belt and then the power steering pump will circulate the fluid and fix the problem...that doesn't sound right to me though.


--------------------
New Toyota project coming soon...

Posts in this topic
- Coomer   OH MY GOD!   Sep 2, 2004 - 3:24 PM
- - macavely   damn coomer .. yea that sucks... i wish we lived i...   Sep 2, 2004 - 3:39 PM
- - sphinx   are you sure you're breaks are'nt wated al...   Sep 2, 2004 - 3:39 PM
- - Coomer   Sphinx, my mechanic told me to remove the calipers...   Sep 2, 2004 - 3:44 PM
- - sphinx   to take off the axles, you just take off the wheel...   Sep 2, 2004 - 3:48 PM
- - Coomer   QUOTE (sphinx @ Sep 2, 2004 - 1:48 PM) to take off...   Sep 2, 2004 - 3:53 PM
- - Anub1s   An Air bubble in your power steering won't cau...   Sep 2, 2004 - 4:39 PM
- - Coomer   Thanks Anub...I wouldn't have ever taken it th...   Sep 2, 2004 - 5:23 PM
- - Celicaca   its ridiculous that you go back to that mechanic.....   Sep 2, 2004 - 5:56 PM
- - Coomer   QUOTE (Celicaca @ Sep 2, 2004 - 3:56 PM) its ridic...   Sep 2, 2004 - 6:08 PM
- - Anub1s   wow coomer you need to move man. It really sucks t...   Sep 2, 2004 - 6:14 PM
- - gtcelica94   damn man i be feeling bad for you   Sep 2, 2004 - 6:23 PM
- - Celicaca   QUOTE (Coomer @ Sep 2, 2004 - 11:08 PM) QUOTE (Cel...   Sep 2, 2004 - 6:26 PM
- - Coomer   QUOTE (Celicaca @ Sep 2, 2004 - 4:26 PM) QUOTE (Co...   Sep 2, 2004 - 6:31 PM
- - BlackCelicaGT94   Coomer! i told u once and ill tell you again.....   Sep 2, 2004 - 6:40 PM
- - Anub1s   Your clutch is one of the most important parts of ...   Sep 2, 2004 - 6:41 PM
- - BlackCelicaGT94   QUOTE (BlackCelicaGT94 @ Sep 2, 2004 - 4:40 PM) Co...   Sep 2, 2004 - 6:41 PM
- - Coomer   I know, I know...had I known that I wouldn't b...   Sep 2, 2004 - 6:46 PM
- - Anub1s   Are you kidding? Thats the only way to learn. And ...   Sep 2, 2004 - 6:49 PM
- - lagos   taking out the axels should mess up anything in yo...   Sep 2, 2004 - 7:09 PM
- - Andason   do you not have an autozone by you coomer? you pay...   Sep 2, 2004 - 7:18 PM
- - hioctane   take your car down to cali. we have car shops at e...   Sep 2, 2004 - 10:40 PM
- - Kwanza26   Dude Coomer... sometimes I really wish I could hel...   Sep 2, 2004 - 11:39 PM
- - Batman722   Coomer, option 1, hook up with another member or m...   Sep 2, 2004 - 11:57 PM
- - Kwanza26   Alright... I re-read the topic and am not happy......   Sep 3, 2004 - 12:01 AM
- - Coomer   Thanks for all the support everyone. I love you al...   Sep 3, 2004 - 12:26 AM
- - Kwanza26   QUOTE (Coomer @ Sep 3, 2004 - 5:26 AM) Thanks for ...   Sep 3, 2004 - 12:30 AM
- - ghostdog   coomer I sympathize with your situation; it hurts ...   Sep 3, 2004 - 12:38 AM
- - 95STHATCH   I'm sorry that you are going through the crap ...   Sep 3, 2004 - 1:04 AM
- - hioctane   there's a guy on the 1320stangs.com forums who...   Sep 3, 2004 - 11:14 AM
- - Coomer   QUOTE (hioctane @ Sep 3, 2004 - 9:14 AM) If you po...   Sep 3, 2004 - 11:27 AM
- - sphinx   well, look. I hate to post this here on this site,...   Sep 3, 2004 - 11:33 AM
- - Coomer   QUOTE (sphinx @ Sep 3, 2004 - 9:33 AM) well, look....   Sep 3, 2004 - 11:36 AM
- - hioctane   QUOTE (Coomer @ Sep 3, 2004 - 9:27 AM) QUOTE ...   Sep 3, 2004 - 11:43 AM
- - dstrbcelica   holy cow..i'm gone for like a week and everyth...   Sep 3, 2004 - 11:46 AM
- - Coomer   I read all about that a while back. It sounds a lo...   Sep 3, 2004 - 11:51 AM
- - Celicaca   QUOTE (Coomer @ Sep 3, 2004 - 5:26 AM) Thanks for ...   Sep 3, 2004 - 12:08 PM
- - Digndoug   sell it on e-bay.. start over.. theres a time whe...   Sep 3, 2004 - 12:14 PM
- - Coomer   Celicaca, I think you're right. I'm not go...   Sep 3, 2004 - 12:19 PM
- - turboinduction   QUOTE (Coomer @ Sep 3, 2004 - 12:19 PM) Celicaca, ...   Sep 3, 2004 - 12:50 PM
- - vangSTa_celica   I'm with turboinduction. If you ever decide t...   Sep 3, 2004 - 12:59 PM
- - vangSTa_celica   In fact, if SlowCelica94 ever decides to give me t...   Sep 3, 2004 - 1:00 PM
- - OrbitalGT95   coomer i still love ur car even though it being ga...   Sep 3, 2004 - 1:11 PM
- - Rjb23   This is gonna be sound harsh but it is what will b...   Sep 3, 2004 - 5:43 PM
- - Anub1s   Dang Coomer life just threw a hard ball at you, bu...   Sep 3, 2004 - 6:33 PM
- - fastgt   hey man i know its hard....ive been in the same si...   Sep 3, 2004 - 10:36 PM
- - bufferdan   i didnt read all of this but from what it sounds l...   Sep 3, 2004 - 10:52 PM
- - hioctane   QUOTE life just threw a hard ball at you, but you ...   Sep 4, 2004 - 2:15 AM
- - Andason   QUOTE (vangSTa_celica @ Sep 3, 2004 - 11:59 AM) I...   Sep 4, 2004 - 9:25 AM
- - turboinduction   i PROMISE Chris... if you do decide to come to Wis...   Sep 4, 2004 - 11:27 AM
- - Sev408   all you had to do was follow my swap guide. i just...   Sep 4, 2004 - 4:56 PM
- - slipgun   If you cant work stuff out with your mom... I thin...   Sep 4, 2004 - 6:35 PM
- - blkGT   i say we move coomer to fl. cmon coomer its fun he...   Sep 4, 2004 - 7:11 PM
- - Yota   I agree, If everyone pitched in a little on this ...   Sep 4, 2004 - 7:18 PM
- - KAMiX   Honestly I'm not willing to pay you money, but...   Sep 4, 2004 - 9:57 PM
- - Coomer   Thanks everyone for all the support and kindness. ...   Sep 5, 2004 - 2:55 AM
- - defgeph   Sorry for your troubles coom.. Glad to see things ...   Sep 5, 2004 - 3:02 AM
- - Coomer   Woo Hoo! I just got back from a 2AM drive thro...   Sep 5, 2004 - 5:31 AM
- - o8poa8o   did you ever get vvti working?   Sep 5, 2004 - 9:29 AM
- - dstrbcelica   that's great that you fell back in love with y...   Sep 5, 2004 - 11:03 AM
- - Coomer   QUOTE (o8poa8o @ Sep 5, 2004 - 7:29 AM) did you ev...   Sep 5, 2004 - 1:22 PM
- - Coomer   Tonight I hooked up a VVT light, and VVT is workin...   Sep 6, 2004 - 3:51 AM
- - vangSTa_celica   I'm so happy for you Coomer. I hope things ke...   Sep 6, 2004 - 11:49 AM
- - celicaBEst   glad everything is going better for you coomer...   Sep 6, 2004 - 11:52 AM
- - sphinx   did you mess arround with anything else besides th...   Sep 7, 2004 - 10:54 AM
- - Supersprynt   Does this mean ur keeping it? See when things are...   Sep 7, 2004 - 10:57 AM
- - Coomer   Well, basically, the VVT solenoid has two wires go...   Sep 7, 2004 - 11:21 AM
- - Supersprynt   Your pics mesmerize me, what is that setting u use...   Sep 7, 2004 - 1:24 PM
- - Coomer   QUOTE (Supersprynt @ Sep 7, 2004 - 11:24 AM) Your ...   Sep 7, 2004 - 1:29 PM
- - Supersprynt   Seriously I love photography but im becoming annoy...   Sep 7, 2004 - 1:33 PM
- - Coomer   QUOTE (Supersprynt @ Sep 7, 2004 - 11:33 AM) Serio...   Sep 7, 2004 - 1:42 PM
- - Supersprynt   QUOTE (Supersprynt @ Sep 7, 2004 - 11:57 AM) Does ...   Sep 7, 2004 - 1:45 PM
- - Coomer   QUOTE (Supersprynt @ Sep 7, 2004 - 11:45 AM) QUOTE...   Sep 7, 2004 - 1:48 PM
- - Supersprynt   I have discs but no calipers, they should be turne...   Sep 7, 2004 - 1:52 PM
- - 97sccelica   QUOTE (Coomer @ Sep 4, 2004 - 11:55 PM) After talk...   Sep 8, 2004 - 1:48 AM


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 30th, 2024 - 10:16 PM