 OH MY GOD!, Argh! I hate my mechanic! |
 Sep 2, 2004 - 3:24 PM
|
 
|
 Administrator  Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%)  |
So on Sunday I drove my car to my mechanic's shop so that I could do my clutch install myself in his garage using his tools, since I no longer have any tools because they got stolen. This was the same mechanic who did my swap, but I had no intention of having him touch the car. Well it turns out that I'm 100% completely mechanically retarded...at the end of the day I didn't even have both axles out of the car.
 And since it was in the shop's main bay and my mechanic had to have it out of there and I had to work, I couldn't continue on it and had to pay him to do my clutch installation. So I got my car back today and took it for a drive...it is now so screwed up it's ridiculous. Now I have to hold the wheel ten degrees or so clockwise to drive straight!  I also have a new paint chip on the side of my door from my mechanic hitting the door with something, and my front brakes squeal when I come to a stop. It's so ridiculously sick how retarded my mechanic is. My car was fine except for a bad throwout bearing due to my mechanic being a retard and using the wrong one on my tranny. Now it doesn't drive straight and my brakes squeal. I just don't even know what to do anymore...my car used to be nice...now look at it...it's a piece of garbage...I don't even think I could sell this car anymore.
-------------------- New Toyota project coming soon...
|
 |
Replies
|
Sep 2, 2004 - 6:31 PM
|
|
||||||
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Yeah, but then there comes a point when the tranny or part of the clutch system just dies on me completely, I have to get the car towed 2 hours away to a shop in Seattle, probably buy more parts because of damage resulting from a bad throwout bearing, and then pay the shop in Seattle a lot of money to replace my clutch and whatever else may have broken by then. Trust me, it's better to replace things like this before you have major problems. Either way I'd have to eventually work on the car. -------------------- New Toyota project coming soon...
|
||||||
Posts in this topic
Coomer OH MY GOD! Sep 2, 2004 - 3:24 PM
macavely damn coomer .. yea that sucks... i wish we lived i... Sep 2, 2004 - 3:39 PM sphinx are you sure you're breaks are'nt wated al... Sep 2, 2004 - 3:39 PM Coomer Sphinx, my mechanic told me to remove the calipers... Sep 2, 2004 - 3:44 PM sphinx to take off the axles, you just take off the wheel... Sep 2, 2004 - 3:48 PM Coomer QUOTE (sphinx @ Sep 2, 2004 - 1:48 PM) to take off... Sep 2, 2004 - 3:53 PM Anub1s An Air bubble in your power steering won't cau... Sep 2, 2004 - 4:39 PM Coomer Thanks Anub...I wouldn't have ever taken it th... Sep 2, 2004 - 5:23 PM Celicaca its ridiculous that you go back to that mechanic..... Sep 2, 2004 - 5:56 PM Coomer QUOTE (Celicaca @ Sep 2, 2004 - 3:56 PM) its ridic... Sep 2, 2004 - 6:08 PM Anub1s wow coomer you need to move man. It really sucks t... Sep 2, 2004 - 6:14 PM gtcelica94 damn man i be feeling bad for you Sep 2, 2004 - 6:23 PM Celicaca QUOTE (Coomer @ Sep 2, 2004 - 11:08 PM) QUOTE (Cel... Sep 2, 2004 - 6:26 PM BlackCelicaGT94 Coomer! i told u once and ill tell you again..... Sep 2, 2004 - 6:40 PM Anub1s Your clutch is one of the most important parts of ... Sep 2, 2004 - 6:41 PM BlackCelicaGT94 QUOTE (BlackCelicaGT94 @ Sep 2, 2004 - 4:40 PM) Co... Sep 2, 2004 - 6:41 PM Coomer I know, I know...had I known that I wouldn't b... Sep 2, 2004 - 6:46 PM Anub1s Are you kidding? Thats the only way to learn. And ... Sep 2, 2004 - 6:49 PM lagos taking out the axels should mess up anything in yo... Sep 2, 2004 - 7:09 PM Andason do you not have an autozone by you coomer? you pay... Sep 2, 2004 - 7:18 PM hioctane take your car down to cali. we have car shops at e... Sep 2, 2004 - 10:40 PM Kwanza26 Dude Coomer... sometimes I really wish I could hel... Sep 2, 2004 - 11:39 PM Batman722 Coomer, option 1, hook up with another member or m... Sep 2, 2004 - 11:57 PM Kwanza26 Alright... I re-read the topic and am not happy...... Sep 3, 2004 - 12:01 AM Coomer Thanks for all the support everyone. I love you al... Sep 3, 2004 - 12:26 AM Kwanza26 QUOTE (Coomer @ Sep 3, 2004 - 5:26 AM) Thanks for ... Sep 3, 2004 - 12:30 AM ghostdog coomer I sympathize with your situation; it hurts ... Sep 3, 2004 - 12:38 AM 95STHATCH I'm sorry that you are going through the crap ... Sep 3, 2004 - 1:04 AM hioctane there's a guy on the 1320stangs.com forums who... Sep 3, 2004 - 11:14 AM Coomer QUOTE (hioctane @ Sep 3, 2004 - 9:14 AM) If you po... Sep 3, 2004 - 11:27 AM sphinx well, look. I hate to post this here on this site,... Sep 3, 2004 - 11:33 AM Coomer QUOTE (sphinx @ Sep 3, 2004 - 9:33 AM) well, look.... Sep 3, 2004 - 11:36 AM hioctane QUOTE (Coomer @ Sep 3, 2004 - 9:27 AM) QUOTE ... Sep 3, 2004 - 11:43 AM dstrbcelica holy cow..i'm gone for like a week and everyth... Sep 3, 2004 - 11:46 AM Coomer I read all about that a while back. It sounds a lo... Sep 3, 2004 - 11:51 AM Celicaca QUOTE (Coomer @ Sep 3, 2004 - 5:26 AM) Thanks for ... Sep 3, 2004 - 12:08 PM Digndoug sell it on e-bay.. start over.. theres a time whe... Sep 3, 2004 - 12:14 PM Coomer Celicaca, I think you're right. I'm not go... Sep 3, 2004 - 12:19 PM turboinduction QUOTE (Coomer @ Sep 3, 2004 - 12:19 PM) Celicaca, ... Sep 3, 2004 - 12:50 PM vangSTa_celica I'm with turboinduction. If you ever decide t... Sep 3, 2004 - 12:59 PM vangSTa_celica In fact, if SlowCelica94 ever decides to give me t... Sep 3, 2004 - 1:00 PM OrbitalGT95 coomer i still love ur car even though it being ga... Sep 3, 2004 - 1:11 PM Rjb23 This is gonna be sound harsh but it is what will b... Sep 3, 2004 - 5:43 PM Anub1s Dang Coomer life just threw a hard ball at you, bu... Sep 3, 2004 - 6:33 PM fastgt hey man i know its hard....ive been in the same si... Sep 3, 2004 - 10:36 PM bufferdan i didnt read all of this but from what it sounds l... Sep 3, 2004 - 10:52 PM hioctane QUOTE life just threw a hard ball at you, but you ... Sep 4, 2004 - 2:15 AM Andason QUOTE (vangSTa_celica @ Sep 3, 2004 - 11:59 AM) I... Sep 4, 2004 - 9:25 AM turboinduction i PROMISE Chris... if you do decide to come to Wis... Sep 4, 2004 - 11:27 AM Sev408 all you had to do was follow my swap guide. i just... Sep 4, 2004 - 4:56 PM slipgun If you cant work stuff out with your mom... I thin... Sep 4, 2004 - 6:35 PM blkGT i say we move coomer to fl. cmon coomer its fun he... Sep 4, 2004 - 7:11 PM Yota I agree,
If everyone pitched in a little on this ... Sep 4, 2004 - 7:18 PM KAMiX Honestly I'm not willing to pay you money, but... Sep 4, 2004 - 9:57 PM Coomer Thanks everyone for all the support and kindness. ... Sep 5, 2004 - 2:55 AM defgeph Sorry for your troubles coom.. Glad to see things ... Sep 5, 2004 - 3:02 AM Coomer Woo Hoo! I just got back from a 2AM drive thro... Sep 5, 2004 - 5:31 AM o8poa8o did you ever get vvti working? Sep 5, 2004 - 9:29 AM dstrbcelica that's great that you fell back in love with y... Sep 5, 2004 - 11:03 AM Coomer QUOTE (o8poa8o @ Sep 5, 2004 - 7:29 AM) did you ev... Sep 5, 2004 - 1:22 PM Coomer Tonight I hooked up a VVT light, and VVT is workin... Sep 6, 2004 - 3:51 AM vangSTa_celica I'm so happy for you Coomer. I hope things ke... Sep 6, 2004 - 11:49 AM celicaBEst glad everything is going better for you coomer... Sep 6, 2004 - 11:52 AM sphinx did you mess arround with anything else besides th... Sep 7, 2004 - 10:54 AM Supersprynt Does this mean ur keeping it?
See when things are... Sep 7, 2004 - 10:57 AM Coomer Well, basically, the VVT solenoid has two wires go... Sep 7, 2004 - 11:21 AM Supersprynt Your pics mesmerize me, what is that setting u use... Sep 7, 2004 - 1:24 PM Coomer QUOTE (Supersprynt @ Sep 7, 2004 - 11:24 AM) Your ... Sep 7, 2004 - 1:29 PM Supersprynt Seriously I love photography but im becoming annoy... Sep 7, 2004 - 1:33 PM Coomer QUOTE (Supersprynt @ Sep 7, 2004 - 11:33 AM) Serio... Sep 7, 2004 - 1:42 PM Supersprynt QUOTE (Supersprynt @ Sep 7, 2004 - 11:57 AM) Does ... Sep 7, 2004 - 1:45 PM Coomer QUOTE (Supersprynt @ Sep 7, 2004 - 11:45 AM) QUOTE... Sep 7, 2004 - 1:48 PM Supersprynt I have discs but no calipers, they should be turne... Sep 7, 2004 - 1:52 PM
97sccelica QUOTE (Coomer @ Sep 4, 2004 - 11:55 PM) After talk... Sep 8, 2004 - 1:48 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 5:36 AM |