wire harness problem Options

[celicaracer18]

ok i emailed elprototypes and they said

Hello:

Based upon our experience, this is not a simple job.

Testing, splicing and configuring for the application is about 30 hours. This assumes both harnesses are in original undamaged condition.

Note: We solder all joints and match all wire gauges to avoid the risk of damage to the vehicle.

The flat rate for this service is $1,500. The hourly rate is $65. / hour for damaged harnesses or repair of modified harnesses.

By now you may be experiencing "sticker" shock; however, we would like to assure you that the cost is real, as is the time to do it properly. (We do a lot of repairs to harnesses that have been improperly modified and the total cost is invariably higher for the customer.)

Regards,

ELP

is there not anyone who an do it cheaper, and i though someone told me ^they did their harness for $300

[Ryu3x16]

i took it to elprototype and they wanted 1500 to get the car running..harness has to be reconstructed completely... i lied and told said i only have 700 on me.. anyways..they did it for 700 bucks which was pretty cool and it also came with a 3 year warranty..yay!

This post has been edited by Ryu3x16: Sep 8, 2004 - 4:58 PM