 Areospeed coilovers, install |
 Sep 6, 2004 - 8:45 AM
|
 
|
 Enthusiast  Joined Sep 1, '04 From Alabama Currently Offline Reputation: 0 (0%)  |
I haven't gotten mine in yet but I'm hoping it comes with instructions. If not, how would they be installed? Would like a step by step process, *pics would be nice
--------------------  CLOSED on 25 acres! -shop coming soon.... |
 |
Replies
|
Sep 8, 2004 - 9:22 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
ok first take off your shock/strut
remove the top nut and take off the cap remove the spring... now whip out a dremel or anything you can grind with you will see a metal cap(its the circle metal piece at the top of the housing) you need to grind about 2 tenths of an inch off(the diameter)or just enough so that you can slide the sleeve over it.....easier solution is to take a hammer and bend the piece down....but make sure not to damage the shock/strut "rod" slide the thickest o-ring in the package over the housing till it hits the bottom slide the metal sleeve over the housing till it rests on the oring use the lil bolts and an allen wrench and tighten make sure all sides of the car are set equally in heighth slide on coil put cap on tighten nut place back on car take to shop for alignment take a corner fast as **** |
Posts in this topic
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 11:33 PM |