FS: Parts that were going on my Celica, TRD wing, extensions, subs, etc. Options

[Coomer]

TRD Replica Wing - This wing fits perfectly and is great quality. It comes with all of the hardware necessary to mount it. It fits coupes and convertibles only. I'm looking to get $300 + shipping, seeing as how I paid $350 or so for it and it's brand new.

Xtant A1040A Subs - I've got two of these 10" subs just sitting in my room brand new in the boxes. I opened them up to see how they looked, and they look excellent. They are the b-stock subs that "have slight cosmetic defects," but the only thing wrong with these subs are a tiny bit of extra glue where the hexagon part of the sub is glued to the dustcap. You have to look hard to see the extra glue(it's almost impossible to see it...if these don't sell I'll keep them for a show-install on my next vehicle, because they look that good. ) Also, the extra glue won't affect sound whatsoever. I'll sell the subs for $50 each + shipping.

10" Fiberglass Sub Enclosure - This 10" custom fiberglass sub enclosure just needs paint and a sub, and some sort of terminal cup or bolts to get the speaker wire through, and it'll be ready to go. It's covered in black primer, and although I'm not sure on airspace, I'd estimate that it's probably 1.1-1.5 cubic feet. It fits a coupe or a convertible, and goes in the right rear corner of the trunk. Shipping would probably be fairly expensive(it's big, but not really heavy), and I'm not sure how much to sell this for, so make me an offer.

Aluminized Piping/Silicone Couplers and Clamps - I've got a piece of 2.5" aluminized piping that could be used to easily make a short ram intake for a sixth gen Celica. It's got a about a 120 degree bend(used to be a U-bend but I cut the piping) with a straight part, so you'd just need to cut it down, or I could do it for you. I've also got three 2.5" blue silicone couplers from HighTempSilicone, and they each come with two silicone liner clamps per coupler. Make me an offer on this stuff.

Lotek A-Pillar Triple Gauge Pod - SOLD

DG Side-Tower Bars - SOLD

Front '94-'95 Bumper Extensions - SOLD

I think that that's most of the stuff I've got sitting around that I need to sell. I accept Paypal, and I'll ship your stuff via insured UPS or Fedex Ground with a tracking number shortly after I recieve payment(Usually the same day or the next day, but I'll let you know and send you photos of the package when it leaves my house, the tracking number, etc.)

I've sold to Nik, Kwanza26, and WannabeGT4 from this site before, and I've got 100% feedback on 45 transactions on eBay(although none are selling...I've been the buyer on all of them. ), and yeah, I run the site, so you don't have to worry about me screwing you over.

Just post on here if you're interested in anything. Thanks!

This post has been edited by Coomer: Sep 21, 2004 - 3:01 PM

[Coomer]

The Lotek A-Pillar triple gauge pod and the front extensions are now sold, and I'm waiting to hear back from someone about the side-tower bars, but everything else is still up for sale. And the side-tower bars may still be, but I'm not sure yet.