Grinding in 3rd gear Options

[skippy344]

Hey Folks,

I just replaced my original clutch at 131K mi. I installed an Exedy Sportline clutch Kit. Resurfaced the Flywheel and used the same oil that the dealership uses.

Now, when cold, its hard to shift into 1st, and when shifting into 3rd, all the time, it grinds a little.

I did not grind before the clutch replacement, but the original clutch was slipping, so that 's why I replaced it.

Any ideas about why its hard to shift into 1st and grinds into 3rd?

Thanks,

SKippy344

[boosted_K2]

if it happens too often that means its a syncro problem, you may need to have the tranny redone. i had to have mine redone at 70K miles... luckly it was under warranty.