 Illuminated Entry Question |
 Nov 30, 2002 - 7:32 PM
|
 
|
 Administrator  Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%)  |
Hello,
Today I took apart part of my dash and I've been working on my keyless entry wiring so that I can have illuminated entry. I found out from http://www.the12volt.com that the door trigger wire is a red and white wire in the driver's side kick panel and that it's negative. Here's a pic to illustrate what I'm about to say:  The green arrow points to the only red and white arrow that I found in the kick panel, but when I took out the connector that connects the wire to another wire(The connector is circled), it doesn't affect anything. The door open sensor appears to act normally, whether the connector is in or out. If anyone has installed an alarm or keyless entry on their Celica, can you tell me which wire I need to tap into to get my illuminated entry to work? Thanks! -------------------- New Toyota project coming soon...
|
 |
Replies
|
Dec 1, 2002 - 1:02 AM
|
|
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
have you checked your dome light to make sure it is set on "door"?
--------------------  99 project version 3.0.. hello SEMA 2010 =) |
Posts in this topic
Coomer Illuminated Entry Question Nov 30, 2002 - 7:32 PM
jontechie Neverstop's right, the auto illumination for k... Dec 1, 2002 - 9:13 AM Coomer Thanks for the replies guys! I did check that ... Dec 1, 2002 - 11:56 AM jontechie You have to remember when the door is closed the d... Dec 1, 2002 - 3:20 PM Coomer I took out the sensor and checked the voltage on i... Dec 1, 2002 - 5:36 PM jontechie I'm looking at a schematic for the lights, and... Dec 3, 2002 - 4:38 PM
Coomer Thanks for the reply. I simply tapped into the fus... Dec 3, 2002 - 8:50 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 23rd, 2025 - 2:43 AM |