Illuminated Entry Question Options

[Coomer]

Hello,
Today I took apart part of my dash and I've been working on my keyless entry wiring so that I can have illuminated entry.

I found out from http://www.the12volt.com that the door trigger wire is a red and white wire in the driver's side kick panel and that it's negative. Here's a pic to illustrate what I'm about to say:



The green arrow points to the only red and white arrow that I found in the kick panel, but when I took out the connector that connects the wire to another wire(The connector is circled), it doesn't affect anything. The door open sensor appears to act normally, whether the connector is in or out.

If anyone has installed an alarm or keyless entry on their Celica, can you tell me which wire I need to tap into to get my illuminated entry to work? Thanks!

[Coomer]

I took out the sensor and checked the voltage on it with the sensor on and off, and then found out that the red and white wire in the kick panel is actually the one that I'll need to use, so I'll just tap into that. Now I've got another problem though.

Do you know where the wire for the parking lights is? I need to tap into this wire for my light flash. I read that it's a green wire near the fuse panel or the steering column, but I can't find one anywhere. Any help would be greatly appreciated.