jdm SIDEMIRROR wiring INFO, attention NEVERSTOP, CTCAT2049 Options

[playr158]

OK after about 10 min....3 15amp fuses and some playing

if you hook the RED wire at the MIRROR to a power source
then a GROUND to the BLACK wire at the MIRROR you get it to move DOWN
then a GROUND to the BROWN wire at the MIRROR you it to move RIGHT

thats as much info as i have now....
BUT that is not goin through the "relay/control switch" that is just wires to wires

[NEVERSTOP]

KICKA$$ ben once agian you have been nothing but helpful

just wish I had time at the moment to read the whole howto

as for the mirror swap... WORKED PERFECT! no probs at all and even got to retain the JDM glass! and we all know how important that is

Like 5 extra HP just in the glass

The only prob I had is when I spliced together the wires I tried to use posilocks.. which where too big to fit into the allowed space for the wires.. you'll see what I mean when you open them up yourselfs.. TO get around this I just used electircal tape and then heat shrinked over it... worked perfect... its nice to be able to see outta my pass mirror agian

Gonna do the drivers either later tonight or tomorrow - dont expect ne probs with it but will post results regardless